|
por este dispositivo também tem outras instruções :
Facilidade de uso
LBT-G1/LBT-G1300. 3-859-546-53. EN Table of Contents Getting Started Step 1: Hooking up the system ............ 4 Step 2: Setting the time ......................... 5 Step 3: Presetting radio stations .......... 6 Connecting optional AV components and outdoor aerials ......................... 7 Playing a CD ........................................... 9 Recording a CD .................................... 10 Listening to the radio ........................... 11 Recording from the radio .................... 12 Playing a tape ........................................ 13 Recording from a tape ......................... 14 The CD Player Playing the CD tracks repeatedly ...... 15 Playing the CD tracks in random order ................................................ 16 Programming the CD tracks ............... 16 Playing only the beginning of each track ................................................. 17 The Tape Deck Recording a CD by specifying track order ................................................ 18 Sound Adjustment Adjusting the sound ............................ 19 Selecting the Preset Equalizer menu . 19 Other Features Falling asleep to music ........................ 20 Waking up to music ............................. 20 Additional Information Precautions ............................................ 22 Troubleshooting ................................... 23 Specifications ........................................ 25 Index ....................................................... 26 LBT-G1/LBT-G1300. 3-859-546-53. EN Getting Started Getting Started Step 1: Hooking up the system Do the following procedures 1 to 4 to hook up your system using the supplied cords and accessories. To complete the setup, do steps 2 and 3 also. Left speakerRight speaker FM antenna AM loop antenna LBT-G1/ LBT-G1300 rear panel 1 Connect the speakers. Connect the speaker cords to the SPEAKER jacks of the same color . Keep the speaker cords away from the aerials to prevent noise. Red (O) Black (O) 4 LBT-G1/LBT-G1300. 3-859-546-53. EN 2 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Extend the FM wire antenna horizontally. ANTENNA AM FM750HM AM loop antenna 3 Set VOLTAGE SELECTOR to the position of your local power line voltage (For LBT-G1 only). VOLTAGE SELECTOR 110V-120V 220V-240V 4 Connect the AC power cord to a wall outlet. If the plug of this unit does not fit your wall outlet, detach the supplied adapter from the plug (Except for North American models). Inserting two R03 (size AAA) batteries into the remote Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. Step 2: Setting the time You must set the time beforehand to use the timer function. 2,4 1,3,5 1 Press CLOCK SET for a few seconds, when the power is off. “– – : – –” appears. 2 Press )±or 0and set the hour. “A” indicates AM and “P” indicates PM. 3 Press CLOCK SET. The minute indication flashes. 4 Press )±or 0and set the minute. continuedE LBT-G1/LBT-G1300. 3-859-546-53. EN Setting the time (continued) 5 Press CLOCK SET. The clock starts working. To light up the display Press TIMER SET when the power is off. The light on the display turns on for 5 seconds. To check the clock when the power is on Press CLOCK SET. The clock is displayed for a few seconds. Step 3: Presetting radio stations You can preset up to 30 stations. 4 3,5 2 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Each time you press the button, the band changes as follows: FM .AM 2 Press )±or 0 for a second. The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo program) appear. 3 Press MEMORY. 1 “MEMORY” flashes. LBT-G1/LBT-G1300. 3-859-546-53. EN 4 Press PRESET + or – and select the preset number you want. Preset number TUNED PRESET EQ FLAT ROCK POPS JAZZ MHz 5 Press MEMORY. The station is stored. 6 Repeat steps 1 to 5 to store other stations. To tune in a station with a weak signal Press )±or 0repeatedly to tune in the station. To change the preset number Start again from step 1. To change the AM tuning interval (except for North American, Mexican, Australian and Middle Eastern models) The AM tuning interval is factory-preset to 9 kHz (10 kHz in some areas). To change the AM tuning interval, turn off the power and change the position of the AM TUNING STEP switch on the rear panel to 10 kHz (or 9 kHz). Then turn the power back on. To reset the interval, repeat the same procedure. Tip The preset stations are retained for a week even if you pull out the AC power cord or if a power failure occurs. Connecting optional AVcomponents and outdoor antennas Connecting a turntable To enhance your system, you can connect a turntable. Refer to the instructions of each compo...
Este manual também é adequado para os modelos :Stereo - LBT-G1300 (548.23 kb)