Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the bottom exterior. IMPORTANT: Never connect two mains leads into a single mains plug. – For MDS-SD1 and TC-SD1 – The mains lead plugs of MDS-SD1 and TC-SD1 are 2-pin type designed to be connected only to CMT-SD1 or MDS-SD1. Do not connect this plug to any other system or mains supply. This appliance is classified Table of Contents Getting Started Step 1: Hooking up the system ............ 4 Step 2: Setting the time ......................... 6 Step 3: Presetting radio stations .......... 7 Saving the power in standby mode ..... 8 Basic Operations Playing a CD ........................................... 9 Listening to the radio ........................... 10 The CD player Playing the CD tracks in random order ................................................ 11 Programming the CD tracks ............... 11 Playing the CD tracks repeatedly ...... 12 Using the CD display ........................... 13 Labelling a CD ...................................... 14 The Radio Labelling the preset station ................. 16 Using the Radio Data System (RDS)* .............................................. 17 Sound Adjustment Adjusting the sound ............................ 18 Reinforcing the bass sound ................. 18 Selecting the surround effect .............. 19 Timer Falling asleep to music ........................ 19 Waking up to music ............................. 20 Optional A/V components Connecting audio components .......... 21 Listening to the sound of connected components .................................... 23 Recording a CD on an MD/tape ........ 23 Connecting outdoor aerials ................. 24 Additional Information Precautions ............................................ 25 Troubleshooting ................................... 26 Messages ................................................ 27 Specifications ........................................ 28 Index ........................................ Back cover * European model only. Getting Started Step 1: Hooking up the system Perform the following procedures 1 to 5 (2, 4 for CMT-SD3 only) to hook up your system using the supplied cords and accessories. The front panel is made of tempered glass. Please remember to handle this unit carefully. CMT-SD1 FM aerial 1335AM loop aerial Right speaker Left speaker CMT-SD3 FM aerial 3412211* 34AM loop aerial Satellite Speaker (Right) Satellite Speaker (Left) Sub woofer * Do not connect the main unit HCD-SD3 to these terminals. This may cause a malfunction. 1 Connect the speakers. 2 (CMT-SD3 only) Connect the speaker cords to the Connect the sub woofer using the SPEAKER terminals as below. speaker cords as below. Back of the main unit Getting Started CMT-SD1 Back of the main unit red black + + L R – – + + L R – – Back of the speakers red lined clear Insert this portion Back of the sub woofer+ + –– black red +_ CMT-SD3 Back of the sub woofer red lined clear Insert the cord here + + –– gray black gray Back of the satellite speaker gray black Notes • Keep the speaker cords away from the aerials to prevent noise. • Be sure to connect both left and right speakers. Otherwise, the sound will not be heard. red 3 Connect the FM and AM aerials. AM loop aerial Set up the AM loop aerial, then connect it. AM FM75 COAXIAL Extend the FM aerial horizontally Note Keep the aerials away from the speaker cords to prevent noise. 4 (CMT-SD3 only) Connect the mains lead of the sub woofer to the main unit, then turn the power switch on the back of the sub woofer to ON. When the power switch is in the ON position, the power of the sub woofer turns on/off when the power of the main unit turns on/off. continued 5 Step 1: Hooking up the system (continued) 5 Connect the mains lead of the CMT-SD1/SD3 to a wall outlet after you complete all the connections. To attach the front speaker pads (CMT-SD1 only) Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Inserting two R6 (size AA) batteries into the remote Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. Adjusting the reflector colour of the satellite speaker (CMT-SD3 only) The reflector of the satellite speaker lights up when the power is on. You can change the colour of the light by turning the R, G or B dials on the bottom of the back of the satellite speakers. Step 2: Setting the time You must set the time before you can use the timer functions. The clock is on a 24-hour system for the European model, and a 12-hour system for other models. The 24 hour system model is used for illus...
Este manual também é adequado para os modelos :Stereo - CMT-SD3 (272.53 kb)