Assessments - 4, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
You can preset the time to be turned off in 10 minute increments. SLEEP , Press SLEEP. Each time you press the button, the minute display (the turn-off time) changes as follows: AUTO t 90MIN t 80MIN t 70MIN t … t 10MIN t SLEEP OFF t AUTO … When you choose “AUTO” The power turns off when the current CD or tape finishes playback (for up to 100 minutes). To check the remaining time Press SLEEP once. To change the time to turn off Press SLEEP repeatedly until the time you want appears. To cancel the Sleep Timer function Press SLEEP repeatedly until “SLEEP OFF” appears. Waking up to music — Daily Timer You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 3: Setting the time” on page 9). 9 4,5,7 CLOCK/TIMER 4,5,8 SELECT 3 2 1 Prepare the music source you want to play. • CD: Place a CD. To start from a specific track, make a program (see “Programming the CD tracks” on page 24). • Tape: Insert a tape with the side you want to play facing forward. • Radio: Tune in the preset station you want (see “Listening to the radio” on page 16). 2 Adjust the volume. 3 Press CLOCK/TIMER SET. “SET (DAILY 1)” appears. 4 Press . or > repeatedly to select “DAILY 1 (or 2)”, then press ENTER. “ON” appears and the hour indication flashes in the display. 1 2 REC SLEEP ALL DISCS §. VOLUME 5 Set the time to start playback. Press . or > repeatedly to set the hour, then press ENTER. The minute indication starts flashing. 1 2 REC SLEEP ALL DISCS §. VOLUME Press . or > repeatedly to set the minute, then press ENTER. The hour indication flashes again. 6 Set the time to stop playback following the above procedure. 7 Press . or > repeatedly until the music source you want appears. The indication changes as follows: t TUNER y CD PLAY T t TAPE PLAY T continued Waking up to music (continued) 8 Press ENTER. The type of timer (DAILY 1 or DAILY 2), followed by the start time, stop time, and the music source, appear, then the original display appears. 9 Turn off the power. To check the setting Press CLOCK/TIMER SELECT and press . or > repeatedly to select the respective mode (DAILY 1 or DAILY 2), then press ENTER. To change the setting, start over from step 1. To cancel the timer operation Press CLOCK/TIMER SELECT and press . or > repeatedly to select “TIMER OFF”, then press ENTER. Tip The power turns on 15 seconds before the preset time. Notes • You cannot activate DAILY 1 and DAILY 2 Timer at the same time. • You cannot set the timer if the starting time and stopping time are the same. • When you use the Sleep Timer, Daily Timer will not turn on the system until the Sleep Timer turns it off. • You cannot activate Daily Timer and Timer- recording at the same time. Timer-recording radio programs You can record a preset radio station from a specified time. To timer-record, you must preset the radio station (see “Step 4: Presetting radio stations” on page 10) and set the clock (see “Step 3: Setting the time” on page 9) beforehand. 7 3,4,5 CLOCK/TIMER 3,4,5 SELECT 2 1 Tune in the preset radio station (see “Listening to the radio” on page 16). 2 Press CLOCK/TIMER SET. “SET (DAILY 1)” appears. 3 Press . or > repeatedly to select “REC”, then press ENTER. “ON” appears and the hour indication flashes in the display. 12 REC SLEEP ALL DISCS §. VOLUME Optional components Optional components 4 Set the time to start recording. Press . or > repeatedly to set the hour, then press ENTER. The minute indication starts flashing. 12 REC SLEEP ALL DISCS §. VOLUME Press . or > repeatedly to set the minute, then press ENTER. The hour indication flashes again. 5 Set the time to stop recording following the above procedure. The start time, followed by the stop time, the preset radio station to be recorded (e.g., “TUNER FM 5”) appear, then the original display appears. 6 Insert a recordable tape. 7 Turn off the power. When the recording starts, the volume level is set to the minimum. To check the setting Press CLOCK/TIMER SELECT and press . or > repeatedly to select “REC”, then press ENTER. To change the setting, start over from step 1. To cancel the timer operation Press CLOCK/TIMER SELECT and press . or > repeatedly to select “TIMER OFF”, then press ENTER. Notes • If the power is on at the preset time, the recording will not be made. • You cannot set the timer if the starting time and stopping time are the same. • When you use the Sleep Timer, Timer-recording will not turn on the system until the Sleep Timer turns it off. • You cannot activate Timer-recording and Daily Timer at the same time. Connecting audio components Select one of the following connections, depending on the component to be connected and method of connecting. Refer to the instructions of each component. Connecting an MD deck for digital recording You can record from CD into the MD deck digitally by connecting an optional optical cable. To the digital input jack of the MD deck continued Connecting audio components (continued) Connecting an MD deck for listening to ...
Este manual também é adequado para os modelos :Stereo - MHC-BX6AV (659.33 kb)