Assessments - 1, GPA: 5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
To cancel the Power Saving Mode Press DISPLAY once to show the demonstration, twice to show the clock display. Basic Operations Basic Operations 1 Press Z OPEN/CLOSE and place a Playing a CD CD on the disc tray. — Normal play If a disc is not placed properly, it will not be recognized. You can play up to three CDs in a row. With the label side up. When DISC SKIP you play a CD EX-CHANGE single, place it on the inner circle of the tray. To insert additional discs, press DISC SKIP EX-CHANGE to rotate the disc tray. 2 Press one of the DISC 1~3 buttons. The disc tray closes and play starts. If you press nN when CD is selected as the function and the disc tray is closed, play starts from the CD loaded on the tray whose disc pointer indicator is lit. Disc pointer indicator Track number Playing time > nN Disc presence Disc tray X indicator number x .> mM CD VOL +/– SHUTTLE 2 PLAY MODE1 . VOLUME CD Xx nN ?/1 (Power) j J l L hH H S s To Do this Stop play Press x. Pause Press X. Press again to resume play. Select a track During play or pause, press > (to go forward) or . (to go back). Find a point in Turn SHUTTLE clockwise (to a track go forward) or counterclockwise (to go back) until it clicks and hold. Release it when you reach the desired point (or press and hold down M or m on the remote). Select a CD Press a DISC 1~3 button or in stop mode DISC SKIP EX-CHANGE (or D. SKIP on the remote). Play only the Press PLAY MODE CD you have repeatedly until “CONTINUE selected 1 DISC” or “SHUFFLE 1 DISC” appears. Play all CDs Press PLAY MODE repeatedly until “CONTINUE ALL DISCS” or “SHUFFLE ALL DISCS” appears. Remove the CD Press Z OPEN/CLOSE. Exchange other Press DISC SKIP EX-CHANGE. CDs while playing Adjust the Turn VOLUME (or press volume VOL +/– on the remote). Tips • You can switch from another source to the CD player and start playing a CD just by pressing the DISC 1~3 buttons (Automatic Source Selection). • If there is no CD in the player, “CD NO DISC” appears in the display. • When a disc tray holding a CD is selected (or the CD in the disc tray is playing) the disc pointer indicator lights. When a disc tray holding a CD is not selected, the disc presence indicator lights, but the disc pointer indicator does not light. When all disc trays are empty, both the disc presence indicator and disc pointer indicator light. Note When a tray has not been detected by the unit, the disc pointer indicator may light even though there is no disc on the tray. Basic Operations Recording a CD — CD Synchro Recording The CD SYNC HI-DUB button lets you record from a CD to a tape easily. You can use TYPE I (normal) tape. DOLBY NR 3 5DISC SKIP EX-CHANGE ?/1 (Power) x 246 1 1 Press Z and insert a recordable tape into deck B. With the side you want to record facing forward 2 Press CD. 3 Press Z OPEN/CLOSE and place a CD. Then, press Z OPEN/CLOSE again to close the disc tray. When the CD you want to record is not selected, press DISC SKIP EX-CHANGE repeatedly to select the CD you want. With the label side up. When you play a CD single, place it on the inner circle of the tray. 4 Press CD SYNC HI-DUB. Deck B stands by for recording and the CD player stands by for playback. The REC PAUSE/START button flashes. 5 Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. 6 Press REC PAUSE/START. Recording starts. To stop recording Press x. Tips • If you want to record from the reverse side, press TAPE A/B to select deck B after step 1. Press nN to start playback of the reverse side, then press x where you want to start recording. TAPE B reverse side indicator lights up (see page 16). • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR” appears after pressing CD SYNC HI-DUB (MHC-BX9/DX9 only). Note You cannot listen to other sources while recording. Listening to the radio –– Preset Tuning Preset radio stations in the tuner's memory first (see “Step 3: Presetting radio stations”). 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Every time you press the button, the band changes as follows: FM y AM 2 Turn SHUTTLE until it clicks (or ?/1 STEREO/ (Power) 1 MONO +/– VOLUME 2 j J l L hH S s H S s TUNING +/– PRESET +/– TUNER BAND VOL +/– press PRESET +/– on the remote) to tune in the preset station you want. Turn counter-Turn clockwise clockwise (or (or press PRESET j J + on the remote) press PRESET – on the remote) for higher preset for lower preset numbers. numbers. Preset number* Frequency Basic Operations MHz TUNED STEREO * When only one station is preset, “ONE PRESET” appears in the display. To Do this Turn off the radio Press ?/1. Adjust the volume Turn VOLUME (or press VOL +/– on the remote). continued Listening to the radio (continued) To listen to non-preset ra...
Este manual também é adequado para os modelos :Stereo - MHC-BX9 (475.06 kb)
Stereo - MHC-DX9 (475.06 kb)