Each press switches the repeat mode as follows: 1 - REPEAT 1 ( The repeat indicator is flashing. ) 2 - REPEAT ALL ( The repeat indicator is steadily on. ) 3 - NORMAL PLAYBACK Up to 20 tracks can be programmed for disc play in any order. Be sure to press the “STOP” button before use. 1. Press the “PROGRAM” button, the display will show “01” and flash. 2. Select desired track by using the “SKIP +” or “SKIP -” button. 3. Press the “PROGRAM” button again to confirm desired track into the program mem

45 rpm adaptor 4. Cue lever 5. Tone arm 6. Speed selector 33 / 45 / 78 7. Locking device for the tone arm 8. Tone arm rest 9. AUTO STOP ON - OFF: Auto stop function of the turntable ON / OFF 10. FM ANTENNA: FM antenna 11. Power cord 12. AUX OUTPUT: Audio output jacks left / right 1 2 Folding lever for the dust cover 3 45678 Before the first use, detach the stylus guard (white plastic cover) by pulling it straight off the front of the cartridge in the direction of the arrow. AUX OUTPUT 11 12 10 9

11. POWER LINES - An outdoor antenna should be located away from power lines. 12. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 13. ESD WARNING - The display does not work properly or no reaction to any operation of the control may be due to the electrostatic discharge. Switch off and unplug the appliance. Reconnect after a few seconds. 14. DAMAGE REQUIRING SERVICE - The appliance should be serviced by

16. SAFETY CHECK - After servicing the unit ask the customer service for a safety check. 17. OVERLOAD - To avoid fire and electric shock do not overload wall outlets and convenience receptacles. 18. ELECTROSTATIC DISCHARGE - Disconnect from mains power supply and remove batteries if unit malfunctions. Reconnect after a short time. DESCRIPTION AND CONTROLS 1. POWER button 2. POWER LED 3. LIFT button 4. TURNTABLE 5. 45RPM insert 6. TONE ARM REST & LOOK 7. TONE ARM WITH STYLUS 8. CUE LEVER 9. SPEED

WARNING: TO REDUCE THE RISK OF AN ELECTRIC SHOCK, DO NOT REMOVE THE FRONT OR BACK COVER. INSIDE THE UNIT, THERE ARE NO PARTS THAT CAN BE REPAIRED OR ADJUSTED BY THE USER. PLEASE REFER TO QUALIFIED TECHNICIANS. The triangular symbol with the exclamation highlights important points of which the user should refer to the manual regarding maintenance and repair. 2954 9/12/06 5:05 PM Page 08 Only connect the power cable to the AC outlet. When you want to use external loudspeakers, connect then to the