Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
2. SUB WOOFER OUT Jack You can connect a powered subwoofer to play back sounds with an even punchier, more powerful low end. The volume is adjusted with the MASTER knob. 3. AUX IN Jacks You can connect a CD player, drum machine, or other device and play back sounds in stereo. Both RCA phono jacks and 1/4” phone jacks are provided. When connected to only the left 1/4” phone jack, playback is in mono. Although the input from AUX IN is output from the speakers, PHONES, and SUB WOOFER OUT, it is not output from LINE OUT. The volume is adjusted with the MASTER knob, and muting on/off for these sounds is controlled with 1 2 3 4 5 White Red PCS-31 Mute On/Off Anti-Feedback White Red PCS-31 Reverb/Delay On/Off Chorus Mixer Tuner On/Off CD Player Drum Machine Powered Sub Woofer Mixer Recorder When connection cables with resistors are used, the volume level of equipment connected to the inputs may be low. If this happens, use connection cables that do not contain resistors. * 926a * Nederlands Portugues Espanol Italiano Francais Deutsch English 13 Names of Things and What They Do the MUTE button. If devices are connected to both the RCA phono jacks and the 1/4” phone jacks, the two inputs are mixed. 4. DI OUT/TUNER OUT Jack The direct sound of the device or instrument connected to the GUITAR or MIC/LINE channel is output here. This is a 1/4” phone TRS jack with balanced output. You can also use this jack to connect a tuner. fig.070 * If balanced output is not required, use a 1/4” phone (mono) plug to connect to this jack. If balanced output is not required, you can use the special connection cable (the optional PCS-31) to use the DI OUT and TUNER OUT simultaneously. fig.080 A phase-inverted signal is output from the COLD side (the red side of the PCS-31). Connect the recording device to the HOT side (the white side of the PCS-31) 5. FOOT SW Jacks The AC-90 accepts the BOSS FS-5L (latch type), BOSS FS-5U (momentary type), and BOSS FS-6 foot switch pedals. * Set the polarity switch as shown below. fig.071 (MUTE, ANTI-FEEDBACK) Connecting a foot switch pedal (optional BOSS FS-5L, FS-5U, or FS-6) using a connection cable (the optional PCS-31) makes it possible to use a latch-type foot switch (the FS-5L or FS-6) to switch muting on and off, or to use a momentary-type foot switch (the FS-5U or FS-6) to control the anti-feedback feature. * For information on the settings for the FS-6, refer to the owner’s manual for the FS-6. fig.050 When a 1/4” phone (mono) plug is used to connect only one foot switch, only the Mute on/off function is enabled. In such cases, you should use a latch-type foot switch pedal (such as the BOSS FS-5L) * The MUTE button should be set to off when a foot switch is connected for muting. You cannot switch the muting off by pressing the foot switch when the MUTE button is on (when the MUTE indicator is lit). * When using an FS-5U (momentary type) to switch muting on and off, the muting is switched on only while the switch is held down. For anti-feedback, a foot switch will function as follows: • When the FREQUENCY knob is positioned in the range from L to H, the switch turns the anti-feedback function on and off. • When the FREQUENCY knob is positioned at AUTO, the switch functions as the START switch for the automatic detection. Holding the foot switch down for one second or longer returns the automatic detection function to standby mode. (CHORUS, DELAY/REVERB) Using a special connection cable (the optional PCS-31) to connect two foot switches (the optional BOSS FS-5U), you can use one FS-5U to switch the chorus on and off, and use the other FS-5U to switch the delay or reverb on and off. fig.060 When a 1/4” phone (mono) plug is used to connect only one foot switch, only the chorus on/off function is enabled. * The chorus on/off function works on both channels. * You cannot switch the chorus on and off by pressing the foot switch when the CHORUS button is off. Tuner White Red PCS-31 Recoreder Example of Using Two Channels Combine d When Using a Mic and a Pickup GUITAR CHANNEL: Piezo or Magnetic Pickup MIC/LINE CHANNEL: Condenser or Dynamic mic (SELECT button = MIC) This allows you to blend the fat midrange of the pickup with the mic’s delicate high end. Set the PHANTOM switch to ON if using a condenser mic. When Using Two Guitars GUITAR CHANNEL: Guitar 1 Piezo or Magnetic Pickup MIC/LINE CHANNEL: Guitar 2 Magnetic Pickup (SELECT button = LINE) You can switch guitars without having to readjust the volume and tone. When Using One Guitar with Two Types of Pickups GUITAR CHANNEL: PiezoPickup (PICKUP button = PIEZO) MIC/LINE CHANNEL: Magnetic Pickup (SELECT button = LINE) You can balance the volume levels using each channel’s VOLUME knob, and adjust the tone for each pickup to attain the optimal sound with the equalizer (BASS/MIDDLE/TREBLE) knobs. PIEZO Condenser mic or Dynamic mic MAGNETIC or MAGNETIC PIEZO MAGNETIC or Guitar 1 Guitar 2 PIEZO MAGNETIC Espanol Italiano Francais Deutsch EnglishPortuguesNede...