Assessments - 4, GPA: 4.3
(
)
)
|
Fotos e especificações Bosch ROTAK 40 |
Facilidade de uso
For all correspondence and spare parts orders, always include the 10-digit part number (TYP) from the nameplate of the machine! Blade Maintenance Stop, remove plug from the power supply and remove the grassbox. Turn the machine on its right side and inspect the blade; if blunt or damaged, replace. Use the following procedure to remove and replace the blade. Hold the blade 17 using gardening gloves (not provided) use a spanner (not provided) to remove the blade bolt 16, blade washer 18 (ROTAK 34/37 only), bevel washer 20 and blade. Fit the bevel washer, blade, blade washer and the blade bolt. Ensure that the blade is the correct way up (so that this symbol can be seen located as in figure J) and tighten the bolt firmly. In the event of a blade becoming difficult to remove or fit, insert a screwdriver into hole 21 to lock the drive. Ensure the screwdriver is removed before attempting to turn the machine on. Do not lubricate blade or blade bolt during refitting. 15 • F016 L70 468 • 06.11 English - 4 After Mowing/Storage Accessories F016 L70 468 - Buch Seite 5 Mittwoch, 8. November 2006 4:13 16 After Mowing/Storage Accessories F016 L70 468 - Buch Seite 5 Mittwoch, 8. November 2006 4:13 16 Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water, solvents or polishes. Remove all grass and debris, especially from the ventilation slots 9. Using a soft brush clean the grass comb 11 removing any grass and debris. Turn the machine on its side and clean the blade area. If grass cuttings are compacted in the blade area, remove with a wooden or plastic implement. Store the machine in a dry place. Do not place other objects on top of the machine. To aid storage loosen the wing nuts 14 and fold the handles. . Ensure cables are not trapped when folding/unfolding top handles, do not drop the handles. Blade ROTAK 34 ....................................................... F016 800 271 ROTAK 37 ....................................................... F016 800 272 ROTAK 40 ....................................................... F016 800 273 ROTAK 43 ....................................................... F016 800 274 Fault Finding The following table gives checks and actions that you can perform if your machine does not operate correctly. If these do not identify/remedy the problem, contact your service agent. Warning: Switch off and remove plug from mains before investigating fault. Symptom Possible Cause Remedy Machine fails to operate Power turned off Mains socket faulty Extension cable damaged Fuse faulty/blown Mower in long grass Motor protector has activated Turn power on Use another socket Inspect cable, replace if damaged Replace fuse Increase height of cut and tilt mower Allow to cool and increase height of cut Machine functions intermittently Extension cable damaged Machines internal wiring damaged Motor protector has activated Inspect cable, replace if damaged Contact Service Agent Allow to cool and increase height of cut Machine leaves ragged finish or motor labours Height of cut too low Cutting blade blunt Underside of machine badly clogged Blade fitted upside down Increase height of cut (see “Height of Cut Adjustment”) Replace blade (see “Blade Maintenance”) Clean machine (see “After Mowing/Storage”) Refit blade correctly (see “Blade Maintenance”) Cutting blade not rotating while machine switched on Cutting blade obstructed Blade nut/bolt loose Clear obstruction Tighten blade nut/bolt Excessive vibration/noise Blade nut/bolt loose Cutting blade damaged Tighten blade nut/bolt Replace blade. 16 • F016 L70 468 • 06.11 English - 5 F016 L70 468 - Buch Seite 6 Mittwoch, 8. November 2006 4:13 16 Disposal Power tools, accessories and packaging should be sorted for environmental-friendly recycling. Only for EC countries: Do not dispose of power tools into household waste! According to the European Directive 2002/96/EC on waste electrical and electronic equipment and its incorporation into national law, products that are no longer suitable for use must be separately collected and sent for recovery in an environmentally-friendly manner. Service Exploded views and information on spare parts can be found under: Great Britain Robert Bosch Ltd. (B.S.C.) P.O. Box 98 Broadwater Park North Orbital Road Denham-Uxbridge Middlesex UB 9 5HJ . Service................................ +44 (0) 18 95 / 83 87 82 Fax Service ............................... +44 (0) 18 95 / 83 87 89 . Advice line......................... +44 (0)18 95 / 83 87 91 Fax Advice................................. +44 (0)18 95 / 83 87 93 Ireland Beaver Distribution Ltd. Greenhills Road Tallaght-Dublin 24 . Service..................................... +353 (0)1 / 45 15 211 Fax ..................................................... +353 (0)1 / 45 17 127 Malaysia Robert Bosch (SEA.) Pte. Ltd. No. 8a, Jalan 13/6 Selangor Darul Ehsan Petaling Jaya 46200 Malaysia . .............................................................+...
Este manual também é adequado para os modelos :Cortadores de grama - ROTAK 34 (4.39 mb)
Cortadores de grama - ROTAK 37 (4.39 mb)
Cortadores de grama - ROTAK 43 (4.39 mb)