Assessments - , GPA:
(
)
)
Fabricante : Roland
Arquivo Tamanho: 1.39 mb
Arquivo Nome :
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
If so, change the position of the keyboard. • To avoid risk of electric shock, do not perform any servicing. Refer all servicing to qualified service personnel. 8 THE CARE OF YOUR E-10 To ensure the best use and full enjoyment of your E-10, please read this guide carefully and thoroughly. ROOM LOCATION Avoid using this keyboard in excessive heat or humidity conditions or where it may be affected by direct sunlight or dust and avoid places subject to high vibrations. CABINET CARE Use a soft dry cloth for dusting. To remove fingerprints or dulling film, use a soft cloth slightly dampened with water and a little mild detergent. Immediately wipe dry with a soft cloth. Do not use solvents such as paint thinners. 9 CONNECTIONS 00 0© 0 0 I JL J_ [ ¿3 1 \\ oo oo o U To AC current =D=— To E-10 AUX-IN sockets From E-10 AUX-OUT sockets From output sockets □□□□□□□□ □□□□□□□□ Another keyboard or a rhythm machine SUSTAIN PEDAL From FV-200 outputs To amplifier inputs (8) FV-200 10 (1) Headphones (PHONES) Socket For your playing convenience, connect a set of standard stereo headphones (RH-12/RH-100) into this socket and you can play and practice in private. Connecting the headphone plug to the PHONES socket will disconnect the internal speakers. The Master Volume slider will adjust the headphone overall volume. (2) AC Socket To connect with household AC current, use the AC power cord supplied with your E-10. (3) POWER Switch (4) Stereo AUX IN Sockets By connecting another keyboard or rhythm machine, the E-10 internal speakers can output all the sounds. To connect a Mono instrument to the E-10, always use the «L (mono)» AUX IN socket. (5) Stereo AUX OUT Sockets The E-10 can be connected to external amplification (Hi-Fi, tape recorder, etc.), to further amplify the sound. When connecting to a Mono amplifier, always use the «R (mono)» AUX OUT socket. (6) MIDI Sockets See MIDI CONTROL (7) SUSTAIN PEDAL Socket Using the optional footswitch (DP-2/DP-6), sustain of Upper tones can be controlled by the foot. See SUSTAIN PEDAL (8) FV-200 Stereo Expression Pedal See page 14 for details. 11 OPERATION SETTING UP THE MUSIC STAND Supplied with your E-10 is a music stand. This will be found in the keyboard carton. To attach to keyboard, insert the two feet into the two holes located on the top panel. POWER ON Press the Power On/Off switch (20) The three SELECT and four REVERB LEDs will light for a few seconds. After the LEDs have been switched off, your E-10 is ready for use. 12 MASTER VOLUME The keyboard can now be played in the Full Keyboard mode using the pre-selected 11 ELEC PIANO tone. Make sure that the MASTER VOLUME slider is moved to the central position. MANLAL DRUM MASTER VOLUME CONTROL The Master Volume slider control enables the overall volume of the E-10 to be raised (moving the slider away from you) or lowered (moving the slider toward you). This control will also control the overall volume when using headphones. DEMO SONG To show you the full sound capabilities of the E-10, four Demo songs have been included. Press the DEMO button (18) and then the START/STOP button (J?) to start the Demo Songs. When the last song has been played, the E-10 will automatically stop playing. (Press the START/STOP button to stop the Demo at any time). There are a total of four Demo Songs. To select each individual Demo Song, press User Program buttons 1, 2, 3 or 4 (JB) (LED will light) after pressing the DEMO button. Then press the START/STOP button to play the Demo Song chosen. (Press the START/STOP button to stop the Demo at any time). 13