Assessments - 5, GPA: 4.8
(
)
)
|
Facilidade de uso
Even if you have little or no experience with MIDI sequencers, this guide will help you achieve results quickly. Experienced sequencer users can also benefit from the guide's direct, operation-oriented approach. The MC-50 is a fully professional MIDI sequencer and indudes extensive recording and editing features. This guide provides step-by-step instructions for only the unit's most basic functions and therefore is not intended to replace the original two-volume Owner's Manual. To fully realize the MC-50's potential, we strongly recommend that you take the time to read these manuals (User's Guide ¡Vol. I] and Reference [Vol. IQ) in their entirety. МС-50 QUICK START! TABLE OF CONTENTS Setting Up / Power Up----------------------------------------------------------------------------------------------------------------------------------------6 Recording & Playback (Realtime)--------------------------------------------------------------------------------------------------------7 Overdubbing (Multi-track Recording)------------------------------------------------------------------------------------------------8 Recording & Playback (Steptime)--------------------------------------------------------------------------------------------------------9 Recording A Rhythm Pattern (Realtime)--------------------------------------------------------------------------------------10 Recording A Rhythm Pattern (Steptime)--------------------------------------------------------------------------------------11 The Rhythm Track--------------------------------------------------------------------------------------------------------------------------------------------------12 Editing (Copying Sections Of A Song)--------------------------------------------------------------------------------------------13 Disk Functions: initialize A Disk----------------------------------------------------------------------------------------------------------------------------------------------14 Saving Data To Disk (Naming A Song)----------------------------------------------------------------------------14 Loading Data From Disk--------------------------------------------------------------------------------------------------------------------15 6 MC-50 SETTING UP 1. Place the MC-50 on a solid, level surface. 2. Connect the supplied AC power adaptor to the unit. 3. With the power off to both the MC-50 and your keyboard: ' - Connect the two devices using MIDI cables as shown in the following diagram: MIDI OUT MIDI IN MIDI OUT 1 AC ADAPTOR POWER UP *** Be sure there is no disk in the MC-50's internal disk drive. St»» Also be sure the volume on your amplifier (monitor system) is turned down. Turn on your keyboard and then turn on the MC-50. QUICK START1 RECORDING & PLAYBACK (REALTIME) Immediately after power up, the unit is in the Standby mode - the point from which recording and playback begins: SONG 1 M= 1 J = 120 REAL 1. Press REC/LOAD. The following display mill appear: Press PLAY > > RECORD M= 1 J = 120 REAL The unit is ready to record a new Song with a 4/4 time signature at a tempo of 120 beats per minute (bpm). To change the basic tempo, use the cursor buttons ( M ► ) to select the tempo display (so it begins to flash) and then rotate the Alpha dial The REC/LOAD and TRACK 1 indicators will flash and the metronome will "beep" at the selected tempo. (Adjust the metronome volume with the control on the rear panel). Recording will take place on TRACK 1, in SONG position number 1. 2. Press PLAY/SAVE (the metronome will give you a two bar "count-in" before recording actually begins). 3. Play the keyboard. 4. Press STOP when you are finished playing. The unit will automatically return to the Standby mode and the measure indicator (M=) will display the number of measures you have just recorded. 5. Press RESET to move to the beginning of the track (or rotate the Alpha dial to select any measure you have just recorded). 6. Press PLAY/SAVE to hear the track. During playback you can vary the tempo by rotating the Alpha dial: the tempo can be varied from 10-250 bpm. If you are unsatisfied with the recording you have just made, simply record the track over again: ® Press RESET to move back to the beginning of the track. Press REC/LOAD. • Press PLAY/SAVE and record the track again. 8 MC-50 OVERDUBBING (MULTI-TRACK RECORDING) After you have recorded the first track to your satisfaction, you can begin to add additional tracks to enhance your Song. (By the way, it doesn't matter what you have recorded at this point - anything will do!) The first part was recorded on TRACK 1 so we’ll record the second part on TRACK 2 From the Standby mode (press RESET to move to the beginning of the track): 1. Press REC/LOAD. 2. Press the TRACK 2 button. This selects TRACK 2 as the track well record on. 3. Press PLAY/SAVE. 4. When recording starts, you will hear the first track that you recorded. Play along with it and recor...