Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Lower values will require longer times. Low Level (Low Frequency Level) 0-127 [4] Adjust the volume of the low frequency rotor. 38 Effects Hi Slow (High Frequency Slow Rate)0.05 -10.0 [5] Adjust the slow speed of the high frequency rotor. Hi Fast (High Frequency Fast Rate) 0.05 -10.0 [6] Adjust the fast speed of the high frequency rotor. Hi Accl (High Frequency Acceleration) 0 -15 [7] Adjust the time it takes for the high frequency rotor to reach the newly selected speed when switching from fast to slow (or slow to fast) speed. Lower values will require longer times. Hi Level (High Frequency Level) 0-127 [8] Adjust the volume of the high frequency rotor. Separate (Separation) 0-127 [9] Adjust the spatial dispersion of the sound. +Speed Slow/Fast [11 ] Simultaneously switch the rotational speed of the low frequency rotor and high frequency rotor. Slow : Slow down the rotation to the specified speed (the Low Slow parameter / Hi Slow parameter values). Fast : Speed up the rotation to the specified speed (the Low Fast parameter / Hi Fast parameter values). Low Gain -12-+12 [17] Adjust the gain of the low frequency range for EQ. Hi Gain (High Gain) -12 - +12 [18] Adjust the gain of the high frequency range for EQ. Cutoff (Cutoff Frequency) 250 - 8k [2] Adjust the basic frequency of the filter. Pre Dly (Pre Delay Time) 0 - 100m [3] Adjust the time delay from when the direct sound begins until the processed sound is heard. +Rate Adjust the rate of modulation. Depth Adjust the depth of modulation. 0.05-10.0 [4] 0-127 [5] -98% - +98% [6] #Level (Output Level) Adjust the output level. 0-127 [20] #Feedback (Feedback Level) Adjust the amount (%) of the processed sound that is returned (fed back) into the input. Negative (-) settings will invert the phase. Phase 0-180 [7] Adjust the spatial spread of the sound. Balance (Effect Balance) 100:0 - 0:100 (D:E)[16] Adjust the volume balance between the direct and the processed sound. D and E stand for “dry sound” and “effect sound”, respectively. Low Gain -12 - +12 [17] Adjust the gain of the low frequency range. Hi Gain (High Gain) -12 - +12 [18] Adjust the gain of the high frequency range. Level (Output Level) Adjust the output level. 0-127 [20] 10: Stereo Flanger [01H, 23H] This is a stereo flanger. It produces a metallic resonance that rises and falls like a jet airplane taking off or landing. A filter is provided so that you can adjust the timbre of the flanged sound. Flanger ""[■ Balance EQ EQ Pre Filter (Pre Filter Type) Off/LPF/HPF [1] Select the type of filter. Off : a filter will not be used LPF : cut the frequency range above the Cutoff parameter HPF : cut the frequency range below the Cutoff parameter 11: Step Flanger [01 H, 24H] The Step Flanger is an effect in which the flanger pitch changes in steps. — .............-0-—| eq|—* -1 Flanger |-' Flanger Balance Pre Dly (Pre Delay Time) 0 - 100m [1] Adjust the time delay from when the direct sound begins until the processed sound is heard. Rate Adjust the rate of modulation. Depth Adjust the depth of modulation. 0.05-10.0 [2] 0-127 [3] -98% - +98% [4] +Feedback (Feedback Level) Adjust the amount (%) of the processed sound that is returned (fed back) into the input. Negative (-) settings will invert the phase. Phase 0-180 [5] Adjust the spatial spread of the sound. 39 Effects Effects #Step Rate 0.05-10.0 [6] Adjust the rate (period) of pitch change. Balance (Effect Balance) 100:0 - 0:100 (D:E) [16] Adjust the volume balance between the direct and the processed sound. D and E stand for “dry sound” and “effect sound”, respectively. Low Gain -12 - +12 [17] Adjust the gain of the low frequency range. Hi Gain (High Gain) -12 - +12 [18] Adjust the gain of the high frequency range. 13: Auto Pan [01 H, 26H] Level (Output Level) Adjust the output level, 12: Tremolo 0-127 [20] [01 H, 25H] Tremolo cyclically modulates the volume to add tremolo effect to the sound. Tremolo J- EQ Tremolo ]— EQ Sqr Sin Mod Wave (Modulation Wave) Tri/Sqr/Sin/Saw1/Saw2 [1] Select the type of modulation. Tri : The sound will be modulated like a triangle wave. : The sound will be modulated like a square wave. : The sound will be modulated like a sine wave. Saw1,2 : The sound will be modulated like a sawtooth wave. The “teeth” in Saw1 and Saw2 point at opposite directions. Saw1 Saw2 +Mod Rate (Modulation Rate) 0.05 -10.0 [2] Adjust the speed of modulation. #Mod Depth (Modulation Depth) 0-127 [3] Adjust the depth of modulation. Low Gain -12-+12 [17] Adjust the gain of the low frequency range. Hi Gain (High Gain) -12 - +12 [18] Adjust the gain of the high frequency range. Level (Output Level) 0-127 [20] Adjust the output level. The Auto Pan effect cyclically modulates the stereo location of the sound. Auto Pan }- EQ Auto Pan Mod Wave (Modulation Wave) Tri/Sqr/Sin/Saw1/Saw2 [1] Select the type of modulation. Tri : The sound will b...