Assessments - 3, GPA: 4.3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• The screen displays as illustrated in this manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. • Windows is a registered trademark of Microsoft® Corporation in the United States and other countries. • Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. CL Editor Installation Guide CL Editor The CL Editor enables you to prepare the CL mixing console (CL5, CL3, and CL1: subsequently called CL) settings beforehand by editing the parameters offline, and also remotely monitor/control the CL online. Installing the Software Procedures 1 Verify that your system meets the operating requirements of each software program. page 4 2 Install the Editor. page 4 3 Configure the network settings. page 6 For subsequent operations, refer to the PDF manual from the [HELP] menu in software program. CL Editor Installation Guide Software installation Minimum System Requirements The system requirements below may differ slightly depending on the particular operating system. OS Windows 7 : Ultimate/Professional/Home Premium Mac OS X : 10.6.x/10.7.x Hard Disk 100MB or more Display 1024 x 768 pixels or higher (recommend 1440 x 900 pixels or higher); High Color (16-bit) or higher Other Pointing device such as a mouse, Ethernet (100BASE-TX/10BASE-T) port Windows 7 CPU 32bit: 2GHz or higher Intel Core/Pentium/Celeron family processor 64bit: Intel 64 compatible processor (however the software program runs at 32bit) Available Memory 1GB or more (2GB or more on 64-bit Version) Mac OS X CPU Intel Core family processor Available Memory 1GB or more (2GB or more on 10.7.x) NOTE The Minimum System Requirements described above are applied to the CL Editor version 1.0.0. Keep in mind that the software is often updated and the system requirements are subject to change. You can check the latest version information of each program and its system requirements at the following website The system requirements may differ slightly depending on the particular computer. Installing software To use CL Editor, you’ll not need to install the other software program besides CL Editor. Follow the appropriate instructions below. CL Editor Installation Follow the instructions below to install the software programs. 1 Double-click “setup.exe” (Windows) or “Install CL Editor.pkg” (Mac) in the compressed file (you have downloaded). A setup dialog of CL Editor is displayed. NOTE When using Windows, if the “User Account Control” window appears, click [Continue] or [Yes]. 2 Follow the on-screen instructions to install the software. NOTE For specific instructions on using the software, refer to the PDF manual from the [HELP] menu in program. CL Editor Installation Guide CL Editor Installation Guide 5 The following diagram shows how to connect the computer to the CL through a dedicated network. NOTE You cannot simultaneously control one CL unit from two computers running CL Editor. However, you can control the CL unit using CL Editor on a computer along with the CL StageMix application installed on an iPad (or iPad2) that is connected via WiFi. Connecting the computer to the CL LAN cable Computer CL console LAN cable Network switch or LAN cable CL Editor Network connector Network Setting s When you connect the computer to the CL through a dedicated network • Settings of the CL You can use the following initial settings. IP address 192.168.0.128 Gateway address 192.168.0.1 Subnet mask 255.255.255.0 • Settings of the computer We recommend that you make the following settings. IP address 192.168.0.100 Subnet mask 255.255.255.0 Default gateway (Router) 192.168.0.1 When you connect the computer to the CL in the existing network Make the network settings of the CL and your computer in accordance with your LAN. Please contact your network administrator for further details. For specific instructions and caution for connecting the CL to LAN, please refer to the following web site: • Settings of the CL IP address Set the IP address so that it does not conflict with the IP address of any other device on the network. Gateway address Set the IP address of the gateway when the gateway exists. Set the vacant address when the gateway does not exist. The address should be set in the same subnet as IP address within LAN in which the subnet is set. Subnet mask Set the subnet mask of the subnet connected to the CL. CL Editor Installation Guide TCP/IP Settings When using Windows 7 1 Select [Start].[Control Panel], then click or double-click [Network and Sharing Center] or [View network status and tasks...
Este manual também é adequado para os modelos :Instrumentos musicais - CL3 (449.97 kb)
Instrumentos musicais - CL5 (449.97 kb)