Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
is displayed, as shown below. 2 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. 3 Turn on your Yamaha mixing console. The “Add New Hardware Wizard” appears. If it doesn’t appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel. 7 Click [Next]. 4Click [Next]. The following window appears. NOTE: You may be prompted to insert your Windows CD-ROM. Do not insert it! Click [OK], and in the “Copy files from” section of the subsequent dialog box, enter “D:\USBdrv_” (replacing “D” with the drive letter of your CD-ROM drive), and then click [OK]. The driver is installed, and the following window appears when the installation is complete. 5Select “Search for the best driver for your device (Recommended),” and then click [Next]. The following window appears. 8 Click [Finish], and then restart your computer. 6 Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) Windows Me 1 Start your computer and Windows, and then insert the included CD-ROM into your computer’s CD-ROM drive. 2 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. 3 Turn on your Yamaha mixing console. The “Add New Hardware Wizard” appears. If it doesn’t appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel. 4 Select “Automatic search for a better driver (Recommended),” and then click [Next]. Windows Me should be able to locate the driver automatically, in which case you can proceed to Step 5. If the driver cannot be located, select “Specify the location of the driver (Advanced),” click [Next], specify your CDROM drive (e.g., D:\USBdrv_), and then continue as prompted. The following window appears when the installation is complete. Windows 2000 1 Start your computer to launch Windows, then log in as Administrator. 2 Insert the included CD-ROM into your computer’s CD-ROM drive. 3 Go to My Computer–>Control Panel–>System– >Hardware–>Driver Signing–>File Signature Verification, select “Ignore—Install all files, regardless of file signature,” and then click [OK]. 4 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. 5 Turn on your Yamaha mixing console. The “Found New Hardware Wizard” appears. 6 Click [Next]. 7 Select “Search for a suitable driver for my device (Recommended),” and then click [Next]. 8 In the subsequent window, select “CD-ROM drives” only, and then click [Next]. NOTE: You may be prompted to insert your Windows CD-ROM. Do not insert it! Click [OK], and in the “Copy files from” section of the subsequent dialog box, enter “D:\USBdrv2k_” (replacing “D” with the drive letter of your CD-ROM drive), and then click [OK]. The driver is installed, and the message “Completing the Found New Hardware Wizard” appears. 9 Click [Finish], and then restart your computer. ENGLISH 5 Click [Finish], and then restart your computer. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 7 Windows XP 1 Start your computer to launch Windows, then log in as Administrator. 2 Insert the included CD-ROM into your computer’s CD-ROM drive. 3 Click the [Start] button, and then click [Control Panel]. The following window appears. 4 Click [Switch to Classic display] in the left column in the window to display all items in the Control Panel. 5 Go to System Hardware–>Driver signatures– >Driver signature options, select “Ignore—Install software without asking for confirmation,” and then click [OK]. 6 Click [OK] to close the “System Properties” window, and then click the Close button to close the “Control Panel” window. 7 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. 8 Turn on your Yamaha mixing console. The “Found New Hardware Wizard” appears. 9 Select “Install software automatically (recommended) (I),” and then click [Next]. The driver is installed, and the message “Completing the Found New Hardware Wizard” appears. 10 Click [Finish], and then restart your computer. Installing Yamaha CBX Driver (DM2000/02R96 only) If you’re connecting your Yamaha mixing console to a serial port on your computer, you’ll need to install the Yamaha CBX driver. If you already have this driver installed, skip this section. 1 Double-click the “Mididrv_” folder on the CD-ROM. 2 Double-click “Setup.exe.” 3 Follow the on-screen instructions to install the software. Installing an Editor You must install an Editor that supports your console before you install Studio Manager. 1 Double-click the “SM_” folder on the CD-ROM. 2 Double-click the folder for the mixing console you’re using (for the DM2000, this is “DM2K_”). 3 Double-click “Setup.exe.” 4 Follow the on-screen instructions to install an Editor that supports your console. Installing Studio Manager After you ...