Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
Studio Manager for DM2000/02R96—Installation Guide Macintosh System Requirements Macintosh System Requirements The system requirements of your operating system may be different to those listed here. Studio Manager for DM2000/Studio Manager for 02R96 Computer A Macintosh G3/233 MHz or better and a USB port OS Mac OS 8.6 to 9.2.2 (Mac OS X not supported) Memory 50 MB or more of free memory (Virtual memory must be turned off) Hard Disk 7 MB or more Display 1024 x 768 pixels, 256 colors or higher 1280 x 1024, 32,000 colors recommended Other OMS 2.3.3 or later Note: If you are using a PowerBook on battery power, open the Energy Save control panel, and in Advanced Settings, Additional Power Savings, turn off Allow processor cycling. Card Filer (DM2000 only) Computer A Macintosh computer with a PowerPC processor or better OS Mac OS 7.5 to 9.2.2 (Mac OS X not supported) Memory 8 MB or more of free memory Hard Disk 6 MB or more Display 800 x 600 pixels, 256 colors or higher Yamaha USB MIDI Driver Computer A Macintosh computer with a PowerPC processor or better and a USB port OS Mac OS 8.6 to 9.2.2 (Mac OS X not supported) Memory 64 MB or more (recommended: 128 MB or more) Hard Disk 2 MB or more System requirements for software not listed here can be found on the CD-ROM. Studio Manager for DM2000/02R96—Installation Guide Chapter 1—Getting Started Chapter 1—Getting Started The following illustration shows the three hookup methods that can be used to connect the DM2000/02R96 to your computer: serial, USB, or MIDI. DM2000/02R96 rear panel Mac or PC 1. Serial 2. USB 3. MIDI USB cable (Yamaha CCJ-Mac or equivalent) (Yamaha CCJ-PC2 or equivalent) USB port Serial cable Mac serial port PC serial port MIDI interface MIDI cables Note: Before you connect to serial or MIDI ports, turn off the DM2000/02R96 and your computer. Configuring the DM2000/02R96 On the DM2000/02R96, use the DISPLAY ACCESS [SETUP] button to locate the MIDI/TO HOST Setup page. Under “Studio Manager,” select a port and assign an ID to the DM2000/02R96. If you are using a serial connection, set the TO HOST SERIAL options as necessary (i.e.,“PC-2” for a Windows PC, or “Mac” for a Macintosh computer). Refer to the DM2000 Owner's Manual or 02R96 Owner's Manual for more information. Studio Manager for DM2000/02R96—Installation Guide Windows Installation Windows Installation n Acrobat Reader To view the Studio Manager for DM2000 Owner’s Manual or Studio Manager for 02R96 Owner’s Manual, you’ll need to install the Adobe Acrobat Reader software, which is included on the CD-ROM. If you already have this software installed, skip this section. 1 Start your computer and Windows, and insert the included CD-ROM into your computer’s CD-ROM drive. 2 On the CD-ROM, double-click the “Acroread_” folder. This folder contains Acrobat software in several languages. 3 Double-click the folder of the language you want to install. 4 Double-click “ar500***.exe.” (“***” indicates the selected language.) 5 Follow the on-screen instructions to install the software. For instructions on using Acrobat Reader, choose Reader Help from Acrobat Reader’s Help menu. USB MIDI Driver If you are connecting the DM2000/02R96 to a USB port on your computer, you’ll need to install the Yamaha USB driver. If you already have this software installed, skip this section. Computer DM2000/02R96 The procedure for installing the Yamaha USB driver depends on the version of Windows that you are using. • Windows 98 & 98SE, see page 6 • Windows Me, see page 8 • Windows 2000, see page 9 • Windows XP, see page 10 Studio Manager USB cable Driver Studio Manager for DM2000/02R96—Installation Guide Chapter 2—Windows Installation Chapter 2—Windows Installation Start your computer and Windows, and insert the included CD-ROM into your computer’s CD-ROM drive. 2 Turn off the DM2000/02R96 and use a USB cable to connect the USB TO HOST port on the DM2000/02R96 to a USB port on your computer. 3 Turn on the DM2000/02R96. The Add New Hardware Wizard appears. If it doesn’t appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel. 4 Click Next. The following window appears. 5 Select “Search for the best driver for your device (Recommended),” and then click Next. Studio Manager for DM2000/02R96—Installation Guide USB MIDI Driver USB MIDI Driver Select “Specify a location,” and specify “D:\USBdrv_” (replacing “D” with the drive letter of your CD-ROM drive), and then click Next. When the driver is located, “YAMAHA USB MIDI Driver” is displayed, as shown below. Click Next. Note: You may be prompted to insert your Windows CD-ROM. Do not insert it! Click OK, and in the “Copy files from” section of the subsequent dialog box, enter “D:\USBdrv_” (replacing “D” with the drive letter of your CD-ROM drive), and then click OK. The driver is installed, and the following window appears when the installation is complete. Click Finish, and then restart your computer. Studio Manager for DM2000/0...