Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Instrumentos musicais - MOTIF-RACK (2.46 mb)
Instrumentos musicais - MOTIF-RACK (3.13 mb)
Instrumentos musicais - MOTIF-RACK (4.7 mb)
Instrumentos musicais - MOTIF-RACK (942.61 kb)
Facilidade de uso
A setting of 100% means the original values are used. -*30 71 OutputSw (ArpOutSw) Arpeggio MIDI Out Switch When set to on, Arpeggio playback and Audition Phrase playback data are output from the MIDI terminal. 36, 52 *3272 TransmitCh (ArpTransCh) Arpeggio MIDI Transmit Channel Determines the MIDI transmit channel for Arpeggio playback and Audition Phrase playback data. TCh...Arpeggio playback data is transmitted by TransmitCh in the Utility mode. - 73 BC/AS1/AS2/FC1/ FC2 BC/Assign1/Assign2/FC1/ FC2 Control Number Sets the control number for the Breath Controller (BC), Assign 1/2 controllers (AS1/2), and Foot Controllers 1/2 (FC1/2). 40 *32 74 Type Filter Type Determines the filter type. The parameters differ depending on the selected type. 27 75 Gain Filter Gain Determines the Gain (the amount of boost applied to the signal sent to the Filter). - 76 Cutoff Filter Cutoff Frequency Determines the cutoff frequency for the Filter, or the central frequency around which the Filter is applied. 26 *34 77 Resonance (Reso) Filter Resonance Determines the amount of Resonance (harmonic emphasis) applied to the signal at the cutoff frequency. 26 *33 78 Reso (Width) Filter width With the BPFw, this parameter is used to adjust the width of the band of signal frequencies passed by the filter. -*33 79 Dstnce Distance Determines the distance between the Cutoff frequencies, for the Dual Filter types. (The two filters in combination are connected in parallel fashion.) 29 80 HPF Cutoff (HPCtof) HPF Cutoff Frequency Determines the central frequency for the Key Follow parameter (below) of the HPF. This parameter is available only when a filter type “LPF12” or “LPF6” is selected (Normal Voice). 28 81 HP Flw HPF Cutoff Frequency Key Follow Determines the Key Follow setting for the HPF Cutoff frequency (Type=LPF12/ LPF6 only). This parameter varies the center frequency according to the note number. Positive settings raise the center frequency for higher notes and lower it for lower notes. Negative settings have the opposite effect. - 82 TmVel FEG Time Velocity Sensitivity Determines the degree to which velocity affects the pitch change of the Filter EG. Positive settings cause the pitch change to become faster for a large Velocity value. Negative values have the opposite effect. This affects only the specified Segments. -*21 83 Segmnt FEG Time Segment -*20 84 LvlVel FEG Level Velocity Sensitivity Determines the sensitivity of the PEG Level (the width of the FEG change) to velocity. The Curve parameter lets you select from five different preset velocity curves (graphically indicated in the display), each determining how velocity affects the Filter EG. -*21 85 CutofVelSns (CtofVl) Filter Cutoff Velocity Sensitivity Determines the sensitivity of the Cutoff frequency to velocity. - 86 ResoVl Filter Resonance Velocity Sensitivity Determines the sensitivity of the Resonance to velocity. - 87 (FEG) TIME FEG Time Determines the transition in tone (cutoff frequency) from the moment a Note On message is received to the point at which the sound stops. 27 88 (FEG) LEVEL FEG Level 27 89 (FEG) Depth FEG Depth 27 90 FlwSns Filter Cutoff Key Follow Sensitivity Determines the Filter Key Follow (Filter Scaling) Sensitivity, or how much the level of the cutoff frequency changes in response to the note number. - 91 CrvVel FEG Level Velocity Curve Determines the sensitivity of the FEG Level to velocity. This parameter lets you select from five different preset velocity curves, each determining how velocity affects the Filter EG. -*54 92 FlwSns FEG Time Key Follow Sensitivity Determines the sensitivity of the FEG Rate settings (the speed of the FEG change) to note position. -*22 66 Function List Ref. # Ref. # Parameter Name Explanation Related Page 93 CntrKy FEG Time Key Follow Center Key Determines the basic pitch (note number) used by the EGTimeSens parameter (above). When the center note is played, the FEG time behaves according to its actual settings. For other notes, the speed varies in proportion to the note number and its interval away from the center key. -*22 94 BP1-4 Filter Cutoff Scaling Break Point Determines the Break Points for Filter Scaling (how the filter cutoff frequency responds to note position) and Offset Levels. -*35 *37 95 Ofst1-4 Filter Cutoff Scaling Offset -*35 *37 96 OutputSel (OutSel) Output Select Determines the specific output(s) for the individual part (Multi Part Edit). Determines the specific output(s) for the individual Drum key signal (Drum Key Edit). -*11 *38 97 (Set1-6) ElmSw Controller Set 1-6 Element Switch Determines whether or not the selected controller affects each individual element. “-”...disabled. 40 *39 98 (Set1-6) Source Controller Set 1-6 Source Determines which controller is to be assigned and used for the selected Set. This controller then is used to control the parameter set in Destination below. 40 *40 *41 99 (Set1-6) Dest Controller Set 1-6 Destination Determines the parameter that is controlled by th...