Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
General Safety Information This manual contains safety, operational and maintenance information. Read this manual and understand all safety warnings and instructions before operating the nailer. Contact your Campbell Hausfeld representative if you have any questions. The operator of this nailer must take the necessary precautions to prevent unsafe conditions outlined in this manual from occurring. The operator is also required to read and understand this instruction manual and all safety warnings, labels, etc. Any employer allowing the use of this nailer in their field of work must distribute this instruction manual to all users. The employer must also ensure all users read, understand and follow the instructions as described in the manual, safety warnings, labels, etc. Danger indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. l Do not use any type of flammable gases or oxygen as a power source for the nailer. Use filtered, lubricated, regulated compressed air only. Use of a compressed gas instead of compressed air may cause the nailer to explode and cause death or serious personal injury. l Do not exceed maximum operating pressure of the nailer (110 PSI). The nailer will not function Operating Instructions Model NB0050 IN247201AV 1/97 Description This nailer is designed for trimwork, interior molding, baseboards, paneling and cabinet assembly and installation. Features include: convenient side loading magazine which holds up to 100 nails, no-mar tip, adjustable exhaust, single cycle trigger and quick clear nose. Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. l Disconnect the nailer from air supply before adjusting, clearing jams, servicing, relocating and during nonoperation. Remember it is possible for the nailer to eject a fastener after servicing the tool. ALWAYS reconnect the air lines before loading any fasteners. Death or serious personal injury could result. l Protect your eyes and ears. Wear Z87 safety glasses, with side shields. Wear hearing protection. Employers and users are responsible for ensuring the user or anyone near the nailer wears this safety protection. Serious eye injury or permanent hearing loss could result. l Do not use a check valve or any other fitting which allows air to remain in the nailer. Serious personal injury could occur. MANUAL CAMPBELL HAUSFELD Model NB0050 CAMPBELL PROFESSIONAL HAUSFELD 110 PSI O CO2 Campbell Hausfeld Nailers meet or exceed Industries’ Standards as set forth by the American National Standard/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-1993. © 1996 Campbell Hausfeld Model NB0050 2 Operating Instructions Warning Continued l Never place your hand or any part of your body in the nail discharge area of the nailer. It is possible for the nailer to eject a fastener and could result in death or serious personal injury. l Never carry the nailer by the air hose or pull the hose to move the nailer or a compressor. Keep hoses away from heat, oil and sharp edges. Replace any hose that is damaged, weak or worn. Personal injury or tool damage could occur. l Always assume the nailer contains nails. Never use the nailer as a toy. Do not engage in horseplay. Always keep others at a safe distance from the work area in case of accidental discharge of nails. Never point the nailer at anyone. Accidental triggering of the nailer could result in death or serious personal injury. l Do not drive a nail on top of other nails. The nail could glance and cause death or a serious puncture wound. l Do not operate or allow anyone else to operate the nailer if any warnings or warning labels are not legible. Warnings or warning labels are located on the nailer magazine and body. l Never leave the nailer unattended or connected to an air compressor when not in use. Serious personal injury can occur if someone picks up and uses the nailer without knowing the correct way to operate the nailer. l Do not drop or throw the tool. Dropping or throwing the tool can result in damage that will make the tool unusable or unsafe. If the tool has been dropped or thrown, examine the tool closely for bent, cracked or broken parts and air leaks. STOP and repair before using or serious injury could occur. Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. l Do not modify or alter the nailer or any nailer parts. Do not use the nailer if any shields or guards are removed or altered. Do not use the nailer as a hammer. Serious personal injury may occur. l Avoid long extended periods of work with the nailer. The nailer can harm the user’s hands or arm. Stop using the nailer if pain occurs. l Always check the work contact element (WCE) trip mechanism of the nailer. A nail could accidentally be driven if the triggering mechanism is not working properly. Serious personal injury may occur. l Disconnect...