Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
For your convenience the MINI-Gressor II™ has been lamped and is ready to be used, there is no assembly required. Please read the following instructions before installing or operating your new MINI-Gressor II™. Operating Instructions: This unit is ready to be hung or set on a flat surface. This unit requires a sound source to operate. The unit will react to the beat of music via its internal microphone. Be sure not to obstruct the cooling vents. Keep in a well ventilated area. For best results, fog or special effects smoke must be used in order to see the beams of light. Caution! Never open this unit when in use. Always disconnect main power before replacing the lamps and fuse. Remember to always replace with the exact same type lamp and fuse, unless otherwise specified by an authorized American DJ® service technician. Lamp replacement: Disconnect the units main power. Remove the thumb screws on trap door located on the top of the unit. Carefully remove and replace lamps. Be sure to follow the handling instructions that are included with your new lamps. Replace the cover and reconnect the main power. ©American DJ® Los Angeles, CA 90058 USA - - Mini Gressor II™...
Este manual também é adequado para os modelos :Instrumentos musicais - Mini-Gressor II (32.98 kb)
Instrumentos musicais - Mini-Gressor II (32.98 kb)