Assessments - 3, GPA: 4.7 ( )

Fabricante : AKG Acoustics Arquivo Tamanho: 666.67 kb Arquivo Nome : Língua de Ensino:

Impedance: < 200 ohms Load Impedance: > 1,000 ohms Power Requirement: 9 to 52 Vdc phantom powering for SE300B Connector: All models XLR male output when connected to SE300B Cable Length: – – – – 10 ft. (3 m) 10 ft. (3 m) – – Finish: All models dark gray matte finish. Size: 0.7 x 5.8 in. 0.7 x 2 in. 0.7 x 2 in. 0.7 x 2.3 in. 0.3 x 0.7 in. 0.4 x 1.0 in. 0.4 x 20 in. 0.4 x 10.2 in. (19 x 47 mm) (19 x 52 mm) (19 x 52 mm) (19 x 58 mm) (7.5 x 17 mm) (11 x 25 mm) (11 x 500 mm) (19 x 260 mm) Net/Shipping Weight: 4.2 oz. (120 g) 1.2 oz. (35 g) 1.2 oz. (35 g) 1.2 oz. (35 g) 0.1 oz. (3 g) 0.1 oz. (6 g) 3.5 oz. (100 g) 2.8 oz. (80 g) 16.6 oz. (470 g ) 6.0 oz. (170 g) 6.0 oz. (170 g) 6.0 oz. (170 g) 6.7 oz. (190 g) 6.7 oz. (190 g) 13.1 oz. (317 g) 13.8 oz. (390 g) *With the 10-dB pad engaged, all SPL values for 1.0% THD can be raised 10 dB. Specifications measured with capsules attached to SE300B. Accessories Model: Included: Optional: C 391 B SA 40 Stand adapter A 91 Swivel joint W 90 Foam windscreen MK 90/3 + H 98, Extension cable and stand adapter/ hanger VR 91 15 in. (350 mm) extension tube VR 92 47.2 in. (1.2 meter) extension tube with short gooseneck W 95 Metal mesh and foam windscreen filter CK 91, 92, 93, and 94 W 90 Foam windscreen Same as for C 391 B CK 97-0 and CK97-C H 40/1 Universal clamp For SE 300 B: B 18 E Battery supply for two capsules N 62 E AC Power supply H 41 Tie pin W 97/1 Foam windscreen (For CK 97-0) C 97-CVR + SE 300 B: W 97 Foam windscreen B 18 E Battery power supply (For CK 97-C) N 62 E AC Power supply CK 97-CVR W 97 Foam windscreen H 10 Stereo bar, H 38 Shock mount SA 38/H 38 Shock mount/stand adapter ST 45 Table stand, ST 305 Heavy duty table stand CK 98 W 98 Windscreen A 91 Swivel joint VR 91 15 in. (350 mm) angled extension tube SE 300 B SA 40 Stand adapter See above Architects and Engineers Specifications The microphone shall be of the condenser type with a capsule frequency cut of 12 dB-per-octave shall be provided. and powering module assembly no larger than 0.75 in. (19 mm) in The polar pattern shall be (*), and on-axis frequency response diameter. For applications requiring field switchable patterns, the shall be (*). Microphone sensitivity shall be at least (*) millivolts capsule shall be demountable and attached by means of a half-turn per pascal, and the self noise floor shall be no higher than (*) bayonet action. (Threaded capsules shall not be allowed under this dB-A. The 1.0 % THD operating level shall be (*) dB SPL. specification, because of inconvenience and the chance of cross-(Additional for C 397-CVR) threading.) The microphone shall accept phantom powering over The microphone capsule shall be separated from the powering/ the nominal ranges of 12 to 48 volts and the nominal output output module by a thin gooseneck extension at least 20 in. impedance shall be equal to or less than 200 ohms at 1 kHz. The (500 mm) in length. The microphone shall be the AKG Acoustics microphone shall provide a switchable 10 dB pre-e...

Baixe o seu

Para fazer o download, introduza 2 dígitos :