Assessments - , GPA: ( )

Instruções de Operação Panasonic, Modelo CF73XCVASBM

Fabricante : Panasonic
Arquivo Tamanho: 1.62 mb
Arquivo Nome : CF73XCVTSBM.PDF

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

Remove the battery pack and disconnect the AC adaptor, then connect them again. If the problem persists, contact Panasonic Technical Support. The battery pack or charging circuit may be defective. The green indicator blinks*1 In high temperature mode, the battery is discharging to the level that corresponds to an 80%*2 charge for normal temperature mode. ( “Battery Power”) Do not remove the battery pack while the battery indicator is blinking green. If you remove it, the power will be turned off forcibly. *1 Only for the main battery pack. *2 In high temperature mode, the level that corresponds to an 80% charge for normal temperature mode is displayed as [100%]. The orange indicator blinks Battery cannot be recharged temporarily because the internal temperature of the battery pack is outside of the acceptable temperature range for recharging. Once the allowable range requirement is satisfied, charging begins automatically. Your computer can be used normally in this state. Touch Pad / Touchscreen The cursor cannot be controlled properly If you are using an external mouse, ensure that the external mouse has been connected correctly. Restart the computer by using the keyboard. (Press , U , and select [Restart] with R ) If the computer does not respond to keyboard commands, read “No response” ( page 29). Unable to input using the touch pad Has the Setup Utility been used to set [Touch Pad] to [Enable]? When external mouse drivers are installed (e.g., IntelliMouse), the touch pad may not be used. Has the touch pad driver been properly installed? Unable to point correctly with the stylus included with the computerAs a result of the physical characteristics of the touchscreen, sometimes the position of the stylus does not match the position of the cursor on the screen. This is not a malfunction. Perform [Calibration]. ( page 14) Reference Manual The Reference Manual is Is Adobe Reader installed? not displayed If you have uninstalled Adobe Reader, install using the following procedures. 1 Log on to Windows with the administrator authority. 2 Select [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then select [OK]. Install Adobe Reader by following the instructions on the screen. Reinstalling B’s Recorder/B’s CLiP When reinstalling, the input Input the following serial number of a serial number has been B’s Recorder: asked B’s CLiP: Troubleshooting 28 SD Memory Card Cannot log on with the SD Memory Card Windows logon user name and password are not set in the SD Memory Card correctly. Enter the Windows user name and password without using the SD Memory Card. After logging on, set the same user name and the password on the SD Memory Card and Windows, using the following operation. • Change the setting of the SD Memory Card by [SD Card Setup] ( “SD Memory Card Security Function”) Fast User Switching Function Some applications do not work properlyWhen switching to a different user with the Fast User Switching function, the following problems may occur. • Some applications may not work properly. • Key combinations with Fn may not work. • It may not be possible to set the settings of the display. • A serial mouse may not work. • The B’s CLiP icon will no longer be shown on the taskbar and CD-RW disc cannot be written using B’s CLiP. • Wireless LAN may not work. In this case, log off all users without using Fast User Switching function, and try the operation once more. If the problem persists, restart the computer. Others No responsePress Ctrl + Shift + Esc to open Task Manager and close the software application which is not responding. Is there an input screen hidden behind another window? Use Alt + Tab to check for other windows being displayed. After shutting down by pressing the power switch for more than four seconds, press the power switch to power on and open the application again. If the program no longer works normally, delete the program using the following menu. Then reinstall the program. [start] - [Control Panel] - [Add or Remove Programs] Troubleshooting 29 Reinstalling Software When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data on your hard disk to another media or to an external hard disk before running the reinstallation procedure. The reinstallation procedure will return the computer to its original condition. Even if a hard disk backup area has been created, this backup area will be erased, and all the backed up data will be lost. (This is not the case when Windows is reinstalled in the first partition.) • If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure. Before Reinstallation Preparing You will need the Product Recovery DVD-ROM and CD/DVD drive (included). Important Before the reinstallation procedure, remove all peripherals (except for the CD/DVD drive). Be sure the AC adaptor is connected until the re...