front and rear. Inspect condition of tires for wear, deterioration, cuts, and damage. Replace worn, damaged or deteriorated tires before operating machine, using only tires of original size, type and construction. 2.1.4. Check Accelerator Pedal. With engine off, depress pedal fully. The pedal must move freely, and immediately return to original position when released. 2.1.5. Check Engine oil and Transmission fluid. Raise empty cargo bed and carefully secure with prop rod. Add oil as needed to br

B. Plug in a radio or lamp to verify that electrical power is present. C. Press the GFCI TEST button in order to trip the system and stop the flow of electricity. D. If the radio or lamp is still functioning, the GFCI is not working properly. Contact an Authorized Service Dealer. E. If the power goes off, the GFCI is working properly. To restore power, press the GFCI RESET button. 2.12.4 Stopping the POWERLINKTM GENERATOR A. Turn off electrical appliance or tool. B. Move system reset switch to O

Safety Instructions & Operator’s Manual For TURF CRUISER ™ ™ TRAIL CRUISER UTILITY VEHICLES † SERIES 1 UV1621BV (85668) Thank you for buying a Turf Cruiser™/Trail Cruiser™ Utility Vehicle! Before operating your machine, read this manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 thru 6. Remember that all power equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use in accordance with the operating instruction