Log:
Assessments - 2, GPA: 4.5 ( )

Instruções de Operação Bushnell, Modelo 78-7351

Fabricante : Bushnell
Arquivo Tamanho: 866.66 kb
Arquivo Nome : 5d090f14-ef0e-4639-9cf1-b8791d0babd7.pdf
Língua de Ensino: itenesfrdept
Ir para baixar



Facilidade de uso


38 Deutsch ................... 56 Italiano .....................76 Portugues ................ 94 Instruction Manual • Manuel D’instructions Manual de Instrucciones • Bedienungsanleitung Manuale di istruzioni • Manual de Instrucoes INSTALL BATTERIES AND (OPTIONAL) SD CARD • Insert 2 AAA alkaline batteries in the compartment (labeled “OPEN” at the back of the Imageview). If you will be taking a large number of photos at high quality settings, you may want to install an SD (Secure Digital) memory card with 32 MB or greater capacity (not included). Insert the card in the slot located at the bottom of the camera “pod”, below the LCD display, with the “corner notch” on the left as indicated, until it clicks into place. TURN ON THE CAMERA AND DISPLAY • Pull out the LCD display by swinging it away from the camera body. Hold the ON/OFF button until the red power indicator light comes on. (If you have installed new batteries, you will see the “Clock Set” screen. Follow the directions in the manual under SETUP>Clock Set). The display will light briefly, then go out to save battery power. Press the LCD to reactivate the display. ADJUST THE SPOTTING SCOPE AND CAMERA • Adjust the scope focus knob (see parts diagram) while viewing a distant object through the scope, until it appears sharp. Set the zoom eyepiece to your desired magnification, from 15x to 45x power. Note that the camera lens is not affected by the zoom (it is 15x only) and focus settings for the spotting scope. Set the focus ring at the front of the camera lens to the approximate distance to your main subject (25 meters or yards, 50 meters/yards, or “ ” (infinity) for distant subjects. The lens may be set between these 3 marks. Try between “50” and “ ” for typical subjects. Check the LCD display and readjust if needed. CHECK CAMERA SETTINGS • With the display on, press the small MENU button (center of 5-way switch), then use the “down” arrow key to check the camera settings. For the best quality photos under most conditions, these settings are recommended: EV: 0.0 (for average lighting conditions and subjects) Resolution: 2048x1536 (largest photo files, sharpest image) White Bal: Auto Meter: Average (unless main subject is much lighter or darker than background-see METER under “Changing Camera Settings” for options) Image Quality: Best Setup: set “Auto Off” time, “Sound” (beep on/off), and “Date Stamp” to your personal preferences. None of the setup items affect the quality of photos. TAKE A PHOTO • With the Imageview mounted on its tripod, confirm that the image appears sharp on the LCD display. (If not, you are probably too close. Unlike the spotting scope optics, the camera focus is preset and is designed only for distant subjects that are 325 feet or more away from the camera). Lightly press the SNAP button to take the photo (or, to avoid accidentally jarring the camera, use the provided remote shutter button instead-plug it into the “Snap Line” jack on the bottom of the camera pod). The display will let you review the photo for a few seconds after you take it. If the exposure or color is bad, try adjusting the EV, Meter, and/or White Balance settings as described in the manual and reshoot. REVIEWING AND DELETING PHOTOS • Press the VIEW button to see a playback of your stored photos. Use the left/right arrow keys on the 5-way switch to step through the photos. To erase a photo from memory, pressing the MENU button four times in a row will delete it by: (1) Turning on the play menu, (2) Selecting DELETE, (3) Selecting DELETE ONE=OK, and (4) Confirming you wish to delete the photo. DOWNLOADING PHOTOS TO YOUR COMPUTER • If you are using Windows 98, be sure to install the driver first from the CD-ROM as directed in “Software Installation”. If you do not already have photo software you prefer to use, install Roxio® PhotoSuite 5 from the CD. Connect the supplied USB cable between the Imageview and your computer. Open Windows Explorer. Under “My Computer” the Imageview will appear as a new “Removable Disk”. Your photos are the .jpg files inside the folders found in this “Disk”. Open the folders, then select and drag (or copy/paste) the photo files to a folder on your hard drive. You are then ready to open and work with the photos using PhotoSuite or the photo software of your choice, and may then delete the old photos from the Imageview memory. After you finish downloading, right click on the “Removable Disk” icon in Windows Explorer and select “Eject” before disconnecting the Imageview. If you get an error message, use “Add/Remove Hardware” in the Windows Control Panel instead-it will direct you how to “Unplug or Eject Hardware”. 12 Top View 3456 Side View CAMERA CONTROLS # Description 1 Power Switch 2 Shutter Release 3 Display On/Off 4 Play (Review) 5 Power Indicator 6 5-way Button (Center=Menu) 7 SD Card Slot 8 USB Port 9 Remote Shutter Release Jack Focus Ring (w/index mark on “infinity”) 987LCD Display (Closed) Bottom View Congratulations on your purchase ...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias