Assessments - 5, GPA: 4.4
(
)
)
|
Facilidade de uso
IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER. Catalog Number SL202B TO REDUCE THE RISK OF INJURY, THE USER MUST READ AND UNDERSTAND THE INSTRUCTION MANUAL SAVE THIS MANUAL FOR FUTURE REFERENCE. Cat. # SL202B Form # 90518422 May ’07 Copyright © 2007 Black & Decker Printed in China SL202B_ManualEN_050107.qxp 5/1/2007 4:15 PM Page 1 GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS WARNING: Read all instructions before operating product. Failure to follow all instructions listed below mayresult in electric shock, fire and/or serious injury. • AVOID DANGEROUS ENVIRONMENTS Don’t use appliances in damp or wet locations. Don’t use appliances in the rain. • KEEP CHILDREN AWAY. All visitors should be kept at a distance from work area. • STORE IDLE APPLIANCES INDOORS. When not in use, appliances should be stored indoors in dry, and high orlocked-up place – out of reach of children. • DON’T FORCE APPLIANCE. It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed. • USE RIGHT APPLIANCE. Do not use the appliance for any job except that for which it is intended. • DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves andsubstantial, non-skid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair. • USE SAFETY GLASSES AND OTHER SAFETY EQUIPMENT. Use safety goggles or safety glasses with side shields, complying with applicable safety standards and, when needed, a face shield. Also use face or dust mask if operationis dusty. This applies to all persons in the work area. Also use a hard hat, hearing protection, gloves, safety shoesand dust collection systems when specified or required. Safety glasses or the like are available at extra cost at yourlocal dealer or Black & Decker Service Center. • DON’T ABUSE CORD. Never carry appliance by cord or yank it to disconnect from receptacle. Keep cord fromheat, oil, and sharp edges. • DON’T OVERREACH. Keep proper footing and balance at all times. • DISCONNECT APPLIANCES. Disconnect the appliance from the power supply when not in use, before servicing, and when changing accessories such as blades and the like. • AVOID UNINTENTIONAL STARTING. Don’t carry plugged-in appliance with finger on switch. Be sure switch is off when plugging in. • GROUND FAULT CIRCUIT INTERRUPTER (GFCI) protection should be provided on the circuits or outlets to beused. Receptacles are available having built in GFCI protection and may be used for this measure of safety. • USE OF ACCESSORIES AND ATTACHMENTS. The use of any accessory orattachment not recommended for use with this appliance could be hazardous. Note: Refer to the accessory sectionof this manual for further details. • STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired. • CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should becarefully checked to determine that it will operate properly and perform its intended function. Check for alignment ofmoving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect itsoperation. A guard or other part that is damaged should be properly repaired or replaced by an authorized servicecenter unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced byauthorized service center. Do not use tool if switch does not turn it on and off. • DO NOT OPERATE portable electric tools near flammable liquids or in gaseous or explosive atmospheres. Motorsin these tools normally spark, and the sparks might ignite fumes. • OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords intended for useoutdoors and so marked. Minimum Gage for Cord Sets Volts Total Length of Cord in Feet 120V 0-25 26-50 51-100 101-150 (0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m) 240V 0-50 51-100 101-200 201-300 (0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m) Ampere Rating More Not more American Wire Gage Than Than 0 -6 18 16 16 14 6 10 18 16 14 12 10 12 16 16 14 12 12 16 14 12 Not Recommended 1 SL202B_ManualEN_050107.qxp 5/1/2007 4:15 PM Page 2 • EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, besure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop inline voltage resulting in loss of power and overheating. The following table shows the correct size to usedepending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller thegage number, the heavier the cord. SAFETY GUIDELINES / DEFINITIONS DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNIN...
Este manual também é adequado para os modelos :Iluminação - Power Series 90518422 (222.44 kb)