Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
4 H . To program the same track in the sequence more than once . After step 2, press [MEMORY/RECALL] desired number of times. . If “'” is displayed . No more tracks can be programmed. . To confirm the contents of the program . Press [MEMORY/RECALL] while the disc is playing. (The numbers of the programmed tracks appear on the display in sequence.) . To delete the entire programmed sequence . Press [.]. Note! The repeat and random play modes are canceled after steps 1 and 2. Press during play or stop mode. MODE F The setting is switched in the sequence indicated below each time [MODE] is pressed. 1-track repeat (1 `)( ----------------] One track is repeated. | v| All-track repeat (`) | All the tracks on the disc are repeated. | v| Random (RANDOM) | The tracks play once each in random | order and then play stops. | v| Random repeat (RANDOM `) | The tracks play repeatedly in random | order. | v| Cancel (no indicator is shown) --------------} When pressed during program play The setting is switched in the sequence indicated below each time [MODE] is pressed. 1-track repeat (1 ` M)(------------] One track is repeated. | v| Memory repeat (` M) | The programmed tracks are repeated. | v| Cancel (M) -------------------------------------------} Note! .You can select the first track to play in random play and random repeat play by pressing [9] while the disc is stopped. All the tracks are played. .You cannot select random play or random repeat play during program play. .The resume function does not work when random or random repeat are on. .The mode is canceled when you disconnect the power source. Anti-Skip System This system deals with skipping in a variety When bumps continue repeatedly Note! of ways: The elapsed playing time disappears and sound is inter-.While the system is on, the disc rotates at a higher .An anti-skip mechanism prevents skipping caused rupted. rate than usual in collecting extra audio data. This when play speed changes due to swinging of the unit. S-XBS TRAIN RANDOM VOL 1 M C could result in a slight increase in disc rotation noise. .A recovery system immediately returns the laser pick .The anti-skip memory compresses digital signals. up to its original position if it is knocked off the track by a strong shock. E .An anti skip memory (max. 48seconds) fills in interruptions caused by bumps and vibrations. The anti-skip system works automatically while the system is on and cannot be canceled. Using the Wired Remote Control SL-SX390 SL-SX390 The remote control can be operated regardless of the HOLD mode of the unit. Basic operation Preparation: Release the remote control from the HOLD mode. EQ HOLD HOLD . Operation confirmation tones » When an operation button is pressed, a confirmation tone sounds. Refer to the parentheses in the illustration for the different types of confirmation tones. . Turning the operation tones off and on » While stopped or during play » Press and hold [EQ] on the remote control for 5 seconds until the unit's display appears. The tone sounds when the setting is changed. To start play Press once during off or stop mode. VOL (Beep) To stop play Press once during play. VOL (Beep...Beep) To turn off the unit Press and hold during play or stop mode. VOL (Beep...Bee...p) Skipping tracks Press during play. (Press [:] twice to skip to the beginning of the previous tracks.) Press and hold during play. VOL Forward (Beep Beep) Backward (Beep Beep Beep) Searching through tracks To adjust the volume VOL VOL .The volume range is 0–25. (Press and hold to change the volume successively.) .A tone (beep-beep) sounds when you reach the minimum or maximum volume. Decrease (Beep) Increase (Beep) EQ EQ Changing the sound quality EQ EQTo turn the tone off To turn the tone on (Beep) (Beep) Press during play or stop mode. The setting switches in the sequence indicated below each time [EQ] is pressed. S-XBS>TRAIN>Cancel (no indicator is shown) ^==========b S-XBS: Select this setting to boost the low-range response. TRAIN: Select this setting to avoid annoying other passengers with noise from your headphones/earphones while riding on the train, or to reduce fatigue when listening for a long period of time. Note! The setting returns to S-XBS when you disconnect the power source. Using the Unit with Optional Accessories Using the unit with an audio system Turn off this unit and the other equipment before connection. SL-SX390 1 Connect the remote control to [E] on the unit. 2 Connect the stereo connection cable to the remote control and the other equipment. .The unit may malfunction if you connect directly to [E] on the unit. .Do not connect the cable to the PHONO jacks on the amplifier. 3 Turn the operation tones off (see above) so they are not heard when you press buttons on the remote control. 4 Set the volume to 10. Make further volume adjustments with the other equipment. SL-SX388 1 Connect the stereo connection cable to [E] on the unit. 2 Set the volume to 10. Make further volume adjustments with...