Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
• “ProgramFull” appears when you program over 25 tracks. Erase the unnecessary tracks to enter other tracks. 28EN Playing MDs Playing MDs Checking the track order While the deck is stopped and “PROGRAM” is on, press DISPLAY/CHAR (or DISPLAY) several times. The track numbers appear in the order they were programmed as follow: “/3 /5 /8 /1 /2/” To check the rest of the track order Turn AMS. You can scroll the display to check all the track numbers you programmed. Changing the track order You can change the order of the tracks in your program before you start playing. To Do the following procedure after Steps 1 and 2 in “Creating Your Own Program”: Erase a track Press 0or )until the track number you want to erase flashes, then press CLEAR. the whole program Keep pressing CLEAR until all programmed track numbers disappear. Add a track to the beginning of the program 1 Press 0until “0” flashes at the left of the first track. 2 Do Steps 3 to 5 on page 28. in the middle of the program 1 Press 0or )until the track which precedes the track to be added flashes. 2 Press AMS so that “0” flashes, then do Steps 3 to 5 on page 28. to the end of the program 1 Press 0until “0” flashes at the right of the last track. 2 Do Steps 3 to 5 on page 28. Change a track in the program 1 Press 0or )until the track number you want to change flashes. 2 Do Steps 3 to 5 on page 28. Useful Tips When Recording From MDs to Tape MENU/NO AMS ± Pp0)r ¤a Inserting blank spaces while recording to tape (Auto Space) The Auto Space Function inserts a 3-second blank space between each track while recording from MDs to tapes, allowing you to use the AMS function during later playback. 1 While the deck is stopped, press MENU/NO twice to display “Setup Menu”. 2 Turn AMS to select “Setup 04”, then press AMS. 3 Turn AMS to select “Auto Space”, then press AMS. 4 Press MENU/NO. z You can turn on the Auto Space Function using the remote Z While the deck is stopped, press A.SPACE repeatedly until “Auto Space” appears in the display. To cancel Auto Space Cancelling the function through menu operation on the deck 1 Do Steps 1 and 2 in “Inserting blank spaces while recording to tape” on this page. 2 Turn AMS to select “Auto Off”, then press AMS. 3 Press MENU/NO. Cancelling the function using the remote Z While the deck is stopped, press A.SPACE repeatedly until “Auto Off” appears. Note If the Auto Space Function is on while recording a selection containing multiple track numbers, (for example, a medley or symphony), blank spaces will be inserted within the selection whenever the track number changes. (Continued) 29EN Playing MDs Playing MDs Pausing after each track (Auto Pause) When the Auto Pause Function is on, the deck pauses after playing each track. Auto Pause is convenient when recording single tracks or multiple, nonconsecutive tracks. Select “Auto Pause” instead of “Auto Space” in Step 3 on “Inserting blank spaces while recording to tape” on page 29. z You can turn on the Auto Pause Function using the remote Z While the deck is stopped, press A.SPACE repeatedly until “Auto Pause” appears in the display. To restart playback Press a or P. To cancel Auto Pause Cancelling the function through a menu operation on the deck Do Steps 1 to 3 in “To cancel Auto Space” on page 29. Cancelling the function using the remote Z While the deck is stopped, press A.SPACE repeatedly until “Auto Off” appears. Note If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting of the Auto Space and Auto Pause Functions the next time you turn on the deck. Fading In and Out (Fader) You can gradually increase the playback level of the signal output to the LINE (ANALOG ) OUT jacks and the PHONES jack at the beginning of a playback (fadein playback) or gradually decrease the playback level at the end of a playback (fade-out playback). This function is convenient when, for example, you want to start or end playback in the middle of the track. FADER 23 NUM ! A.B 22– CHAR ? REPEAT WRITE CLEAR 21Z NAME / >25 24. ( P.HOLD A.SPACE + STANDBY = START PSTOP T.REC MUSIC SYNC REC-IT 25, ) M.SCAN 0= a ) +rPpCD-SYNC CD PLAYER FADER DIGITAL REC LEVEL /ANALOG OUT LEVEL FADER Fade-in playback During playback pause, press FADER at the position where you want fade-in playback to start. Zin “Fade Z3.2s” flashes and the deck performs fade- in playback until the counter reaches to “0.0s”. Fade-out playback During playback, press FADER at the position where you want fade-out playback to start. zin “Fade z3.2s” flashes and the deck performs fade- out playback until the counter reaches “0.0s”. The deck changes to playback pause when fade-out playback finishes. Note The signal level output to the digital output connector does not change. z You can set the duration of fade-in and fade-out playback independently Do Steps 1 to 5 in “You can set the duration of the fade- in and fade-out recording independently” on page 20. 30EN Playing MDs Playing MDs Playing an MD Using a Ti...
Este manual também é adequado para os modelos :Jogadores - MDS-JB920 (1.6 mb)