Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
After a period of storage and/or nonuse, check for leaks, and burner obstructions. If camp stove is not in use, the tank must be disconnected and stored in a proper location. Always use a meat thermometer to ensure food is cooked to a safe temperature. Never cover entire cooking area with aluminum foil. Do not store a spare LP gas tank under or near this appliance. Please use protective gloves when assembling this product. Do not force parts together as this can result in personal injury or damage to the product. Deaths, serious injury or damage to property may occur if the above is not followed exactly. page no. Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Exploded View Parts List 1 Cooking Grid 55-09-212 2 Regulator 55-09-214 3 Body Assembly 55-09-209 4 Control Knob (2)* 55-09-211 5 Foot (4) 55-09-213 Hardware * Pre-assembled 1 3 2 4 5 5 A Wing Nut M5 Steel 2 pcs Outdoor LP Gas Camp Stove Model No. GCT803W Assembly Instructions 1 2 Attach Cooking Grid For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference. DO NOT RETURN PRODUCT TO STORE. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. To complete assembly you will need: • (1) Leak Detection Solution (Instructions on how to make solution are included in “Operating Instructions” section) • (1) 14.1 oz LP gas tank. Note: You must follow all steps to properly assemble grill. Typical assembly: approximately 5 minutes. A x 2 3 Attach Regulator Storage of Regulator When Not In Use page no. Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Operating Instructions Figure 1 This camp stove is designed to operate with a one CAUTION: If burner flame goes out during operation, immediately turn pound 7-3/8” high disposable / 14.1 oz. propane gas the gas “OFF” and let the gas clear for about 5 minutes before re- tank (DOT 39 Cylinder). lighting. DO NOT ATTEMPT TO REFILL ANY ONE POUND (14.1 oz.) PROPANE GAS TANKS! Turning Off 1. Turn control knobs to the “OFF” position. Connecting Gas Tank 2. Remove LP gas tank and properly store tank. 1. Make sure the regulator/control valve is in the “OFF” position. (Figure 1) First Use 2. Lubricate the threads of the regulator valve with petroleum jelly, insert the gas tank into the 1. Make sure all labels, packaging and protective films have been removed from the camp regulator valve and hand-tighten firmly. (Figure 2) stove. Figure 2 2. Remove manufacturing oils before cooking on this camp stove for the first time, by operating the camp stove for at least 5 minutes on “ON”. This will “heat clean” the internal parts and dissipate odors. 3. Test for leaks Checking for Leaks Burner Connection Cooking 1. Make sure the control valve is securely fastened to 1. Ignite burner(s) per lighting instructions. the burner. (Figure 3) If your unit was assembled for you, visually check 2. Wear protective gloves to place pots and/or pans onto burner grid. the connection between the burner and control 3. Wear protective gloves and use long handled tongs to place food into the pots and/or pans valve. above the lit burner(s). WARNING: Failure to inspect this 4. Adjust controls to desired temperature. connection or follow these instructions 5. Cook until desired internal food temperatures are achieved. could cause a fire or an explosion which can cause death, serious bodily injury, or Figure 3 6. Turn camp stove “OFF” by turning control knob to the “OFF” position. Remove LP gas tank damage to property. and properly store tank. 2. If the burner pipe does not rest flush to the control valve, please contact 1.800.762.1142 for assistance. Cleaning and Care Regulator / 1lbs. LP Gas Tank Connection CAUTION: All cleaning and maintenance should be done when camp stove is cool and with the fuel supply disconnected. 1. Make 2-3 oz. of leak solution by mixing one part liquid dishwashing soap with three parts water. CAUTION: DO NOT clean any camp stove part in a self cleaning oven. The 2. Make sure control knob is “OFF”. (Figure 1) extreme heat will damage the finish. 3. Spoon several drops of solution, or use squirt bottle, CAUTION: Keep camp stove clear and free from combusitble materials, at the LP gas tank to regulator connection. (Figure gasolline, and other flammable vapours and liquids. 3 & 4) CAUTION: Do NOT obstruct the flow of combustion and ventilation air. 4. Inspect the solution at the connection, looking for Figure 4 bubbles. If NO bubbles appear, the connections are Notices secure. 1. Abrasive cleaners will damage this product. If bubbles appear, you have a leak. 2...