Log:
Assessments - 2, GPA: 4.5 ( )

Instruções de Operação Frigidaire, Modelo MWTK(P)27K

Fabricante : Frigidaire
Arquivo Tamanho: 1.49 mb
Arquivo Nome : 316495084.pdf
Língua de Ensino: enesfr
Ir para baixar



Facilidade de uso


. IMPORTANT – Observe all governing codes and coordinates. . Note to Installer – Be sure to leave these instructions with the Consumer. . Note to Consumer – Keep these instructions for future reference. . Skill level - Installation of this appliance requires basic mechanical and electrical skills Read these instructions completely and carefully. . Proper installation is the responsibility of the installer. . Product failure due to improper installation is not covered under the Warranty. . Unplug the microwave oven before attempting installation of this kit. . Because the kit includes metal parts, caution should be used in handling and installation to avoid the possibility of injury. . Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty. FOR YOUR SAFETY: WARNING – Before beginning the installation, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. IMPORTANT - PLEASE READ AND FOLLOW THIS BUILT-IN KIT IS DESIGNED FOR USE ONLY WITH ELECTROLUX MICROWAVE OVENS SPECIFYING BUILT-IN KIT MWTK(P)27K OR MWTK(P)30K ON THE RATING LABEL ON THE LEFT SIDE WALL OF THE MICROWAVE OVEN CAVITY. QUESTIONS? For customers in the United States call: 1-800-944-9044 For customers in Canada call: 1-800-265-8352 (English) 1-800-668-4606 ext.8199 (French) Visit our Website at: READ CAREFULLY. KEEP THESE INSTRUCTIONS. PN316495084 SEPT 2009 PARTS INCLUDED IN THE KIT 1. Front Frame Assembly - QTY 1 2. Exhaust Duct Assembly - QTY 1 3. Screw A - QTY 2 4. Screw B - QTY 4 CHOOSING A LOCATION FOR YOUR MICROWAVE OVEN IF BUILT-IN Built-In Trim Kit allows for the installation of microwaves listed below to be built into a cabinet or wall by itself or over an electric wall oven*. Microwave Models: FGM0205KB PLMBZ209GC CGM0205KB FGM0205KF GLMB209DS CGM0205KF FGM0205KW GLMB209DB CGM0205KW FPM0209KF CPM0209KF See Illustration 1 for proper location when building in above a wall oven. Carefully follow both the wall oven installation instructions and Electrolux’s Built-in Kit instructions. If building over a wall oven, be sure the clearance between the wall oven and the microwave oven is a minimum of 3 inches. *NOTE: Trim Kit and microwave can only be built-in over an electric self-clean or non self-clean single cavity wall oven. CABINET OR WALL CUTOUT Cutout Dimensions Height (A) Minimum Maximum 16 3/4” (42.5 cm) 17” (43.2 cm) Width (B) Minimum Maximum 24 3/4” (62.9 cm) 25” (63.5 cm) Depth (C) Minimum 20” (50.8 cm) Illustration 1 Screw A Screw B Front Frame Assembly Exhaust Dust Assembly fig2.jpg Illustration 2 ELECTRICAL OUTLET LOCATION Outlet should NOT be in the shaded area as indicated on Illustration 2 NOTE 1: If the Depth (C) dimension is greater than 21” (53.3 cm), the outlet location may be in any area ...

Este manual também é adequado para os modelos :
Placa - MWTK(P)30K (1.49 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias