Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Before connecting the appliance to the power supply, make sure that: • The appliance is earthed and the plug is compliant with the law. • The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the appliance itself. • The voltage falls within the range of values indicated on the data plate. • The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets. ! Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. ! The cable must not be bent or compressed. ! The cable must be checked regularly and replaced by authorised technicians only. ! The manufacturer declines any liability should these safety measures not be observed. ! Do not remove or replace the power supply cable for any reason. Its removal or replacement will void the warranty and the CE marking. INDESIT does not assume liability for accidents or damage arising from replacement/removal of the original power supply cable. Replacement can only be accepted when carried out by personnel authorised by INDESIT and using an original spare part. 20 Description of the appliance C A A B A E D Switching on the glass ceramic hob Traditional cooking zones Traditional cooking zones (A) consist of circular heating elements. They turn red approximately ten seconds after they have been switched on. Each cooking zone is fitted with a control knob (D) which allows you to select from 12 different temperature settings between a minimum of 1 and a maximum of 12. Extendable cooking zones The extendable radiant elements (B) are distinguished by the fact that they have a double heating zone. You can switch the smaller internal cooking zone on its own, or both the external and internal zones. The control knob (D) allows you to choose between two power levels, which may both be adjusted between a minimum value of 1 and a maximum of 12: • The lowest power level can be set by turning the knob clockwise from 1 to 12. • Turn the knob completely round ( ), until you hear a slight click, to enable the maximum power level. This in turn can be adjusted to a value between 12 and 1 by turning the knob anticlockwise. To restore the minimum power level, turn the knob and set it back to position 0. For double cooking zones, the first part of the knob movement activates the smaller (internal) cooking zone. To activate both (internal and external), it is necessary to turn the knob completely ( ) and then select the desired power level between 12 and 1. Recommended power levels for various types of cooking: Set. Radiant Burner 0 Off. 1 To melt butter and chocolate. 2 To heat liquids. 3 4 For creams and sauces. 5 6 For cooking at the boiling point. 7 8 For Roasts. 9 10 For boiling large pieces of meat. 11 12 For frying. For utilising both cooking areas. Operation indicator light (C) This is i...
Este manual também é adequado para os modelos :Placa - C (1.35 mb)
Placa - VRM 641DC (1.35 mb)
Placa - DX (1.35 mb)
Placa - VRM 630C (1.35 mb)