The remote temperature sensor (TX6U) and mounting bracket (Figure 2) 3. (3) 1/2" Philips screws 4. One strip of double sided adhesive tape 5. Instruction Manual and Warranty Card 6. (2) AAA 1.5V batteries 7. (2) AAA 1.5V batteries ADDITIONAL EQUIPMENT 1. Philips screwdriver (not included) Figure 1 Figure 2 2 QUICK SETUP Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor temperature station and remote temperature sensor 3 to 5 feet apart. 2. Batteries s

MAIN UNIT • Remove the battery compartment door. • Install 2 batteries ( UM-3 or “ AA” size 1.5V) matching the polarity as shown in the battery compartment. • Replace the battery compartment door. LOW BATTERY WARNING A low- battery indicator [ ] will appear next to the indoor or remote data reading line of the main unit warning that the corresponding batteries need replacement. 9 GETTING STARTED WEATHER DISPLAY After batteries are installed; remote sensor will transmit temperature data at 45 sec

This is normal and does not affect the general performanceof the product. The transmission and reception of thetemperature readings will resume once the interference ends. CHECKING REMOTE AND INDOOR TEMPERATURE The indoor temperature is shown on the third line of themain unit display. The remote temperature is shown belowthe top line of the display. The wave icon near the remotetemperature reading indicates that there is a good signalreception from the remote sensor. 15 If there is no signals re

In this package you will find: • One main unit (receiver) • One remote rain gauge (transmitter) • One remote temperature sensor (transmitter) TS13C Please keep this manual handy as you practical step-by-step instructions, well as technical specifications and precautions you should know. 3 PRODUCT OVERVIEW MAIN UNIT FEATURES • Wireless transmission of the rainfall data from the remote rain gauge to the main unit up to 100 feet (30 meters) away • Wireless transmission of the temperature from the r

In this case, the local altitude/elevation must be programmed according to the GPS readings, Internet, etc. If you wish to know pressure changes in your surrounding metro area, then SEA LEVEL barometric pressure option should be selected. In this case, the SEA LEVEL barometric pressure value can be adjusted according to the local metro area weather information. (Sources – local TV or radio station, etc.) OPERATION Press UP or DOWN until the weather forecast icon on the upper left of the display

• Multi-channel capability to monitor temperature and humidity in up to 3 remote locations In this package you will find: • Indoor/Outdoor temperature with trends • Main unit (receiver) • Indoor/Outdoor humidity with comfort level indicators • Remote sensor (transmitter) TS33 • Weather forecast in 5 large graphic icons: Please keep this manual handy as you use your Sunny, Partly Cloudy, Cloudy, Rainy and Snowy • Barometric pressure indication new item. It contains practical step-by-step instruct

In this package you will find: One Five-Channel Remote Thermo-hygrometer (transmitter) (TS34C) One User Manual Standard Package Contents Picture Components Thermo Hygrometer Sensor Installation All data measured by this remote sensor is transmitted to the main unit wirelessly, with the operating range up to 328 feet (100 meters) in the open area. Remote thermo-hygrometers (temperature & humidity sensors) can be placed indoors or outdoors, depending on the area where the temperature and humidity

In this package you will find: • One Thermometer with LCD display • One removable temperature probe with 10 feet cable • One User Manual SELECTION TEMPERATURE DISPLAY IN CELSIUS OR FAHRENHEIT LOW BATTERY WARNING 7 7 Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautionsyou should know. THERMOMETER PLACEMENT 7 SECURING TEMPERATURE PROBE OUTDOORS 7 PRODUCT OVERVIEW MAIN UNIT FEATURES PRECAUTIONS S

If this does not work, check the wireless transmission path from the remote UV sensor to the main unit and change its locations if necessary. Although wireless signals can pass through solid objects and walls, the remote UV sensor should ideally be within the line of sight of the main unit. The following may be the cause of reception problems: • The remote UV sensor and a main unit are too far from each other. • The signal shielding materials, such as metal surfaces, concrete walls or dense vege

VIEWING REMOTE (CHANNEL) TEMPERATURE AND HUMIDITY Static Display: In Temperature and Humidity Window, press the CHANNEL button to recall a different channel. Channel Auto-Scan Display: To enable automatic scan of the different channels, press and hold CHANNEL, until the .. icon is displayed. Each valid channel will be alternately displayed with a 5 seconds delay. NOTE: the channel auto-scan feature can be active only if there are more than one remote sensors operating and are set to different ch