Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
Run LED is litBoard has power Machine is powered up and Run LED Possible bad start switch, scrub switch Unplug low voltage plug. If Run LED lights up: is not litor wiring short (does not apply to S.S. The start switch or scrub switch failed in the closedPizio switch on model 501 or UH200)position, or there is a wiring short Machine is powered up and Run LEDCheck voltage is not lit after unplugging the low voltage plug2. Wash pump runs but nothing else works 4 amp board output fuse is blownReplace the 4 amp fuse. Check for wiring problem3. Check continuity of the start switchUse plug pin #8, wire #15 as common to plug pin # 1, wire #20 (see Fig.1) Check continuity of the scrub switchUse plug pin #8, wire #15 as common to plug pin # 3, wire #19 (see Fig.1) Check continuity of the cycle light Use a meter with diode setting - to cycle light, plug pin # 6, wire #16 and common pin # 8, wire # 15 Check continuity of the scrub light Use a meter with diode setting - to scrub light, plug pin # 7, wire #17 and common pin # 8, wire # 15 Check continuity of door safety switch Use a meter with diode setting - to door safety switch, plug pin # 4, wire #18 and common pin # 8, wire # 154. Fill LED is litIndicates output voltage to fill valve5. Select the appropriate setting on theNote: This solid state timer board is used ...
Este manual também é adequado para os modelos :Máquinas de lavar louça - 501-HTN (5.87 mb)
Máquinas de lavar louça - 201HT (5.87 mb)
Máquinas de lavar louça - 201HTN (5.87 mb)
Máquinas de lavar louça - 401HT (5.87 mb)