Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
15 Menu Button* Press this button to display the menu screen. * For models with the printer feature 1-1 Main Components and Their Functions Switching On and Off 1 Switch On the power before operating the copier. This section will show you how to switch the copier On/Off. Breaker Switch If the breaker trips repeatedly, contact your local authorized Panasonic service representative. Check the Ground Fault Interrupter once a month to ensure that it works correctly. Power requirements and ground connectionof Safety Notesfor an explanation on the Ground Fault Interrupter. The Breaker Switch is normally set to the "I" position. However, when it is not used for an extended period of time or when it is to be relocated, switch it to the "O" position. Switching On the Power You can change the default screen from the Basic Features screen to any other screen and the new screen will be displayed. The machine will be in the Ready mode approximately three minutes after the power is switched On. When the Power Saver mode is On, the display will still be Off and the Power Saver indicator will be On. Turn the power switch to the " " position. The power is switched On. After a while, the default screen appears on the display. 1-2 Switching On and Off Getting to Know Your Copier Switching Off the Power If the machine is switched On but has been left unused for a fixed period of time, the Power Saver feature will reduce the power consumption of the machine to conserve energy. See 1-5: Saving Powerfor details. Turn the power switch to the " " position. The power is switched Off. 1 Switching Off the Power Automatically This feature is available for models with only the copy function. See Time-Outs in 6-1: List of Custom Preset Functionson how to change the settings. The Auto Power Off feature is not available for models with the printer feature. The Auto Power Off feature will be enabled if the machine has been left unused for a certain duration (factory default is 60 minutes) while the power is On. Press the switch to the " " position to switch On the power. Auto Start When the Auto Start feature is activated, "Please wait ... Job will start automatically." appears on the message area of the display. The indicator light at the top left corner of the Auto indicator is lit. You can cancel the Auto Start feature by pressing the Stop button and then the Clear C button. Load the document while the message "Please wait.." is being displayed. Then press the Start button. The document will automatically be scanned once the machine is ready to copy. This is called the Auto Start feature. 1-2 Switching On and Off Getting to Know Your Copier Using the Touch Panel Display Using the Touch Panel Display You can select a feature shown on the Touch Panel display by touching itscorresponding button on the display. Here, the Basic Features screen isused to explain the respective parts of a screen. In this section, the Touch Panel display will be referred to as the “display”. Feature Status Mark 1 The status of a feature is indicated by a mark. Message Area The status of the machine and its operating instructions are displayed here. The number on the right indicates the number of sets to be copied. Feature Icon Explanation on a feature and its settings are represented pictorially. The above Paper Supply display is a sample. Each default setting is Tray 1 : 8.5 x 11" (A4) Tray 2 to 4 : 11 x 17" (A3) Tray 6 : 8.5 x 11" (A4). Above Trays can be changed. Feature Button Pop-up Mark Touch this button to select or program a This mark indicates that the button has a pop-up feature. The currently selected button is screen for additional selections. Select this button highlighted. to display the pop-up screen. The features shown on the display (includes message in the message area or the screen) will depend on the installed options and the model of the machine. In the above example, Tray 6 (High Capacity Feeder), and Finisher are installed. For models with the printer feature, see the Operating Instructions (For Printer). Select one of these buttons to change the display. 1-3 Using the Touch Panel Display 1-3 Using the Touch Panel Display 9 Getting to Know Your Copier 1 The System Administrator can use the Tools Mode to select the screens to be displayed. See sections on Feature Defaults and Screen Layout in 6-1: List of Custom Preset Functions for details. Changing the Display Screen Four screens are available for selection on the display. They are the Basic Features screen, Customized Features screen, Features Menu screen and Stored Jobs screen. Select the Basic Features, Customized Features, Features Menu or Stored Jobs button located on the right-hand side of the display. The corresponding screen of the selected button will be displayed. The factory default screen when you switch On the power is the Basic Features screen. The features on the Basic Features screen and the Customized Features screen are also shown on the Features Menu screen. Select the ...
Este manual também é adequado para os modelos :Impressoras - DP-6000 (3.81 mb)