Assessments - 0, GPA: 4
(
)
)
|
Fotos e especificações Sharp AL-1555 |
Facilidade de uso
To use another GDI printer or a Windows Printing System printer, you must change the port setting of the printer driver using the following procedure. If another printer does not operate properly when the SHARP Personal MFP Series printer driver is set to "FILE" as described below, uninstall the SHARP Personal MFP Series printer driver. To uninstall the printer driver, see the online manual. 1 2 3 Click the "start" button. Click "Control Panel", click "Printer and Other Hardware" and then click "Printer and Faxes". On Windows 95/98/Me/NT4.0/2000, select "Settings" and then click "Printers". Right-click the "SHARP AL-xxxx" (where xxxx is the model name of your unit) icon in the printer dialog box and then click "Properties". 4 5 6 Click the "Port" tab ("Details" tab - on Windows 95/98/Me) in the "Properties" dialog box, select "FILE": in the "Print to the following port" list box, and click the "OK". Right-click the icon of the printer to be used and click "Properties". Click the "Port" tab ("Details" tab - on Windows 95/98/Me) in the "Properties" window, select "LPT1" (or the currently used port), and click the "OK" button. To use the SHARP Personal MFP Series again, perform the same procedure but select the port to be used (for example, LPT1) in step 4. CONNECTING THE INTERFACE CABLE This unit includes both USB and parallel interface connectors. Interface cables for connecting the unit to your computer are not included with this unit. Please purchase the appropriate cable for your computer. • If you intend to use the unit as a scanner, it must be connected to your computer with a USB interface cable. The scanner function cannot be used if the unit is connected with a parallel cable. • USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home Edition preinstalled. • Do not connect the interface cable before installing the MFP driver. The interface cable should be connected during installation of the MFP driver. (p.21) Connecting the USB interface cable Obtain a shielded USB interface cable. 1 4 2 Insert the cable into the USB interface connector located on the rear of the unit. Insert the other end of the cable into the interface connector of your computer, or the USB hub connected to your computer. Connecting the parallel interface cable 1 2 3 Obtain an IEEE1284 shielded parallel interface cable. Ensure that your computer and unit are turned off. Insert the cable into the parallel interface connector located on the rear of the unit, and fasten with clasps. 4 Insert the other end of the cable into the interface connector of your computer. 45 5 MAKING COPIES 5 MAKING COPIES This chapter describes basic copying functions and some other copying functions. SCAN ONCE / PRINT MANY The copier is equipped with a 1-page memory buffer. This memory allows the copier to scan an original once only and make up to 99 copies. This feature allows for improved workflow, reduced operating noise from the copier and reduced wear and tear on the scanning mechanism. This feature provides for a higher reliability. COPY FLOW 1 Make sure that paper has been loaded in the paper tray (p.15) or multi- bypass tray (p.17), and check the paper size (p.14). If paper is not loaded, see page 15. If you are using the single bypass, check the paper size and then proceed to the next step without loading paper. 2 Place the original. If you are using the original table, see "Using the original table" (p.47). If you are using the SPF/RSPF, see "Using the SPF/RSPF" (p.48). When copying onto A4 paper or a large size, pull out the paper output tray extension. 4 Start copying. Press the start ( ) key. 3 Select the copy settings. If you wish to copy using the initial settings (p.13), proceed to the next step. To set the number of copies, see page 49. To adjust the resolution and contrast settings, see page 49. To enlarge or reduce the copy, see page 51. AL-1555 model To print on both sides of the paper, see page 52. To change the tray used, see page 53. If you are using the single bypass Do not press the start ( ) key. Insert a sheet of paper into the single bypass. (Page 18) Multiple copies are not possible using the single bypass. Do not insert paper in the single bypass when a copy job from the paper tray is in progress. This will cause a misfeed. • If you start a print job while a copy job is in progress, the print job will begin when the copy job is completed. • The scanning function cannot be used while a copy job is in progress. About interrupt copying If you press the start ( ) key to begin a copy job while a print job using the paper tray or multi-bypass tray is in progress, the copy job will begin automatically after the print data in the unit's memory is printed (interrupt copying). When this is done, the print data remaining in the computer is not sent to the unit. When the copy job ends, press the clear ( ) ke...
Este manual também é adequado para os modelos :Impressoras - AL-1045 (5.15 mb)
Impressoras - AL-1456 (5.15 mb)
Impressoras - AL-1255 (5.15 mb)