Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
*2 Printing is unavailable in MS-DOS mode. *3 The administrator's authorization is required to install this software using this installer. 19 BEFORE INSTALLATION The following table shows the drivers and software that can be installed for each version of Windows and interface connection method. MFP Driver Button Manager SharpdeskPrinter driver/ Print Status Window Scanner driver Users of Windows 98/Me/2000/XP who will use the USB interface connection Available Available Available Users of Windows 98/Me/2000/XP who will use the parallel interface connection Available*1 Not Available Not Available Available*2 Windows 95/NT 4.0 users *1 When the unit is connected through the parallel port, the Print Status Window can only be used when the parallel port is set to ECP mode. To set the parallel port mode, refer to your computer manual or ask the manufacturer of your computer. *2 Sharpdesk can be installed when using a parallel interface connection, however, the unit’s scanner function cannot be used. • If you are using some of your computer.s memory as a RAM drive, the printer driver may not be allocated the correct amount of memory. In such a case, reduce the size of your RAM disk, or do not use the RAM disk. Please refer to your Windows documentation for further information. • Is there another GDI printer driver or a Windows Printing System printer driver already installed? If installed, change the printer port setting. For the change of the printer port setting, see "USING OTHER INSTALLED DRIVERS" (p.44). Flow of installation Refer to the following table and then begin installation Operating system Interface Reference pages for how to install Windows XP USB/ Parallel Installing onto Windows XP (USB/parallel interface) (p.21) Windows 98 USB Installing onto Windows 98/Me/2000 (USB interface) (p.25) Parallel Installing onto Windows 95/98/Me/NT4.0/2000 (Parallel interface) (p.28) Windows Me USB Installing onto Windows 98/Me/2000 (USB interface) (p.25) Parallel Installing onto Windows 95/98/Me/NT4.0/2000 (Parallel interface) (p.28) Windows 2000 USB Installing onto Windows 98/Me/2000 (USB interface) (p.25) Parallel Installing onto Windows 95/98/Me/NT4.0/2000 (Parallel interface) (p.28) Windows 95/ NT 4.0 Parallel Installing onto Windows 95/98/Me/NT4.0/2000 (Parallel interface) (p.28) INSTALLING THE SOFTWARE The following term is used in this section. MFP Means the unit as a printer and scanner. • For this description, it is assumed that the mouse is configured for right hand operation. • To print or scan, the MFP must be in the online state. • The scanner feature only works when using a USB interface cable. • If any error message appears, solve the problem following the instructions on the screen. After your problem is solved, the installing procedure will be continued. Depending on your problem, you may have to exit the installer. In this case, click the "Cancel" button to exit the installer. After solving your problem, reinstall the software from the beginning. Installing onto Windows XP (USB/parallel interface) Before starting the installation, make sure the USB or parallel interface cable is not connected to the MFP. 4 1 2 Insert the supplied CD-ROM into your CD-ROM drive. Click the "start" button, click "My Computer" ( ), and then double-click the CD-ROM ( ) icon. When any of "Found New Hardware Wizard" messages appear during the software installation, be sure to click the "Cancel" button. 3 Double-click the "Setup" ( ) icon. If the language selection screen appears after you double click the "Setup" icon, select the language you wish to use and click the "Next" button. (Normally, the correct language is selected automatically.) 4 Select the software packages to be installed, and then click the "Next" button. The software packages with checkmark ( on the list on the screen will be installed. Click the "Display README" button to show the information on the selected package. ) 21 • If you are using the parallel interface connection, do not select the Button Manager checkbox because this feature is not supported with the parallel interface. • If the following screen appears, click the "OK" button. Review the contents in "BEFORE INSTALLATION" (p.20), and then select only appropriate the software packages to be installed. 5 Review the software packages to be installed on the screen, and then click the "Start" button. The software packages to be installed will be displayed on the screen. If inappropriate packages are displayed, click the "Back" button to select appropriate packages again. 6 Copying files for MFP driver installation and parallel interface setup (This step will start if it was selected in step 4). After confirming the message in the "Welcome" window, click the 1 "Next" button. 2 A dialog box appears asking you to verify that the USB or parallel interface cable is not connected to the MFP. Make sure that the interface cable is not connected and click the "Next" button. Click the "Next" button in the dia...
Este manual também é adequado para os modelos :Impressoras - AL-1456 (5.15 mb)
Impressoras - AL-1555 (5.15 mb)
Impressoras - AL-1255 (5.15 mb)