Assessments - 3, GPA: 3.7
(
)
)
|
por este dispositivo também tem outras instruções :
Impressoras - CLX-9206NA (834.04 kb)
Impressoras - CLX-9206NA (20.23 mb)
Impressoras - CLX-9206NA (887.03 kb)
Facilidade de uso
5.Load paper with the print side facing up. 6.Adjust the paper length guide to the desired paper length. 7.After loading paper into the tray, pinch the paper width guide and move it toward the stack of paper until it lightly touches the side of the stack. Do not press the guide too tightly to the edge of the paper: the guide may bend the paper. Do not overload the tray: it may cause paper jams. Make sure that the paper is below the maximum paper capacity guide inside the tray. 1M A X 1Paper capacity guide 8.Fix the the paper length guide using the locking switch. Release the locking switch to load a different sized paper. 1 1Locking switch 9.Insert the tray back into the machine. When you print a document, set the paper type and size for the tray. For information about setting the paper type and size on the control panel (see "Tray setting" on page 47). The standard tray and optional dual cassette feeder can automatically detect various-sized paper (see "Media sizes automatically detected" on page 44). If you set the Tray Confirmation Message ON in Tray Settings, the confirmation window appears automatically (see "Setting the tray confirmation message" on page 47). Check if the paper size and type in the tray are detected or not. If you want to set the paper size and type or if the machine cannot detect them, you can set the size and type directly in the confirmation window. To print from an application: a)Open an application and start the print menu. b)Open Printing Preferences (see "Opening printing preferences" on page 101). c)Press the Paper tab in Printing Preferences, and select an appropriate paper type, size, and source. d)Press OK. e)Start printing from an application. Multi-purpose tray Tips on using the multi-purpose tray 1.Open the multi-purpose tray and pull out the extention if necessary. 2.Flex or fan the edge of the paper stack to separate the pages before loading originals. 3.Load the paper with the side to be printed on facing down. 4.Squeeze the multi-purpose tray paper width guides and adjust them to the width of the paper. Do not force too much, otherwise the paper will bend resulting in a paper jam or skew. 5.When you print a document, set the paper type and size for the multi-purpose tray (see "Media sizes automatically detected" on page 44). For information about setting the paper type and size on the control panel (see "Tray setting" on page 47). The settings made from the machine driver override the settings on the control panel. To print from an application: a)Open an application, and start the print menu. b)Open Printing Preferences (see "Opening printing preferences" on page 101). c)Press the Paper tab in Printing Preferences, and select an appropriate paper type, size, and source. d)Press OK. e)Start printing from an application. Media sizes automatically detected Printing on special media When using special media, we recommend you feed one piece of paper at a time. Check the maximum input number of media for each tray (see "Print media specifications" on page 165). The media types are shown in the Printing Preferences. This paper type option allows you to set the type of paper to be loaded in the tray. This setting appears in the list so that you can select it. This will let you get the best quality printout. If not, the desired print quality may not be achieved. Envelope -Weight: The weight of the envelope paper should not exceed 90 g/m2 (16 lb) otherwise, a jam may occur. -Construction: Prior to printing, envelopes should lie flat with less than 6 mm (0.25 inches) curl, and should not contain air. -Condition: Envelopes should not be wrinkled, nicked, or damaged. -Temperature: Use envelopes that are compatible with the heat and pressure of the machine during operation. 1 Acceptable 2 Unacceptable Labels -Adhesives: The adhesive material should be stable at your machine’s fusing temperature of about 170°C (338 °F) for 0.1 second. -Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. -Curl: Prior to printing, labels must lie flat with no more than 13 mm (0.5 inches) of curl in any direction. -Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. Card stock/ Custom-sized paper Letterhead/Preprinted paper Glossy Load a single sheet of paper into the multi-purpose tray at a time, glossy side facing down. Tray setting The settings made from the machine driver override the settings on the display screen. Setting the paper size 1.Press Machine Setup > Tray Settings > Settings > select the tray you want from the display screen. 2.Press Paper Size and select the paper size. Setting the paper type 1.Press Machine Setup > Tray Settings > Settings > select the tray you want from the display screen. 2.Press Paper Type and select the paper type. 3.Press to save the selection. Setting the tray confirmation message 1.Press Machine Setup > Tray Settings > Setti...
Este manual também é adequado para os modelos :Impressoras - CLX-9201NA (20.68 mb)
Impressoras - CLX-9201ND (20.68 mb)
Impressoras - CLX-9251NA (20.68 mb)
Impressoras - CLX-9251ND (20.68 mb)