2. The icemaking cycle begins when the evaporator rods are dipped into the water box. You will hear the compressor working. 3. It will take approximately 6-12 minutes for each icemaking cycle, depending on the size selected. The larger the size, the more time is needed to make the ice. After the cycle is finished, the water box will tilt forward and the remaining water will flow back into the water storage tank. The evaporator rods will then release the ice cubes. Note: If the room ambient tempe

Read all instructions carefully. 2. DANGER! To protect against risk of electric shock, do not immerse cord, plug or any parts of the unit in water or other liquids. 3. Close supervision is necessary when using this appliance near children. This appliance is not suitable for use by children. 4. Never leave an appliance unattended while in use. 5. Do not place an appliance on or near a hot gas or electric burner, or in a heated oven. Do not place on top of any other appliance. 6. Do not let the po

Read all instructions carefully. 2. To protect against risk of electric shock, do not immerse cord, plug or any parts of the unit in water or other liquids. 3. Close supervision is necessary when using this appliance near children. This appliance is not suitable for use by children. 4. Never leave an appliance unattended while in use. 5. Do not place an appliance on or near a hot gas or electric burner, or in a heated oven. Do not place on top of any other appliance. 6. Do not let the power cord

1-2 Safety Instructions ......................................................................3 Parts and Accessories............................................................. 5-6 Operating Instructions................................................................7 Pre-Operating Instructions .................................................................7 Operating Instructions.......................................................................8 Operating Process.......................

If the unit doesn't stop, even with ice cubes obstructing the sensor, move the unit out of the sunlight. 6. To continue making ice, check that there is water in the water storage tank. If there is no water in the water storage tank, then no water will be pumped into the water box, and the operation will stop. The "Add Water" LED display will light up. Press the “OFF” button. Fill the water storage tank with water, and then press the “ON” button for the icemaker to begin operating again. Allow th

4. Each cycle produces 9 cubes of ice. The ice making cycle takes about 6 to 15 minutes, depending on the ambient (room) temperature. Ambient and initial water temperatures affect the actual ice making time. It is not suggested to try making ice if room temperature exceeds 90. degrees farenheit as ice making time may vary greatly. 5. The default size of the ice cube is medium. If you want small size cubes, press the “Select” button on the control panel and the LED indicator should switch from “M

If damage is suspected, contact the nearest authorized service center for examination, repair or electrical or mechanical adjustment. 8. Unplug from power outlet when not in use, before putting on or taking off attachments, and before cleaning. 9. The use of accessory attachments that are not recommended by the appliance manufacturer may cause fire, electric shock or injury. 10. Avoid contact with moving parts when the unit is in operation. 11. Never touch the cooling elements when the unit is i

Ice making cycle is normal but no ice is made Ambient temperature or water temperature inside reservoir is to high Operate ice makers at ambient temperature below 90. and pour colder water into reservoir. Refrigerant liquid leakage. Turn power off, unplug unit and contact a qualified technician. Pipe in the cooling system is blocked. Turn power off, unplug unit and contact a qualified technician. Solid block of ice forms on evaporator Ice dispensing not complete from storage compartment Unplug a