Assessments - 5, GPA: 3.8
(
)
)
|
Facilidade de uso
Installation Instructions ROUGHING-IN DIMENSIONS SINGLE HOLE LABORATORY FITTINGS [133mm] 5-1/4 " 3° 3" [76mm] 2 DIA. 6-3/8" [162mm] 1/8"- [3mm-35mm] WARE THICKNESS [60mm] 2-3/8" [60mm] 2-3/8" 7/8 "DIA. [330mm] 13 " [330mm] 13 " NPSM COUPLING NUT FOR 3/8" OR 1/2" FLEXIBLE RISER DEX W' 16" DIA. [24mm] 1/4" DIA. [6mm] 23/32" [18mm] 6 [152m [51mm] [324mm] 12-3/4" [168mm] 6-5/8" PLAN VIEW HOLE LOCATION DY SHANK AND PIN (SINGLE CONTROL) 1/4" [6mm] PIN LENGTH X 3/16" [5mm] DIA. DEX W' 23/ [18 1-1/8" DIA. [29mm] 1/4" DIA. [6mm] " [152m 6 [365mm] 14-3/8" [311mm] 12-1/4" DIA. [27mm] [337mm 13-1/4" 1/8"-1-5/8" [3mm-41mm] WARE THICKNESS 7-3/8" [187mm] 7-1/8" [181mm] PLAN VIEW HOLE LOCATION FOR BODY SHANK AND PIN (DUEL CONTROL) 3/8" [9.5mm] O.D. COPPER TUBBING FOR 3/8" [9.5mm] COMPRESSION CONNECTIONS 10" 7/8 "DIA. [27mm] 1-1/16" [365mm] 14-3/8" [311mm] 12-1/4" 1/8"-1-5/8" [3mm-41mm] WARE THICKNESS mm] CKNESS -3/8" 87mm] 133mm] 5-1/4" 3° NPSM COUPLING OR 3/8" OR 1/2" FLEXIBLE RISER 1/4" [6mm] PIN LENGTH X 3/16" [5mm] DIA. 3/8" [9.5mm] O.D. COPPER TUBBING FOR 3/8" [9.5mm] COMPRESSION CONNECTIONS 3° 6-3/8" [162mm] LOCK NUT STEEL WASHER M968487 SINGLE AND DUAL CONTROL LABORATORY FITTINGS SINGLE CONTROL LABORATORY FITTINGS DUAL CONTROL LABORATORY FITTINGS 1 For vandal resistant fitting only, a pin hole will be need to be drilled into the deck offset from the mounting shank hole. Note: For vandal resistant models it is important to obtain the rough-in drawing for the particular model. The drawing illustrates exact size and positioning of the offset hole. Drill a 1/4" (6mm) dia. hole 3/8" (10mm) deep in mounting surface, per roughing-in dimensions for vandal resistant pin. For vandal resistant fitting apply putty to underside of fitting base to assure a good seal and level fit. When installing a vandal resistant fitting, align pin with pin hole in mounting surface. For standard fitting, assemble rubber washer onto body shank. Place body shank through hole in deck and assemble steel washer and lock nut. Tighten securely. Pipe to correct service to complete installation. After installation is complete turn service on and check all connections for leaks. TOOLS AND SUPPLIES REQUIRED Adjustable Wrench Teflon Tape Drill Plumbers' Putty or Caulking FITTING BASE PUTTY BODY SHANK BODY SHANK FITTING BASE LOCK NUT STEEL WASHER Channel Locks 7272.220 7272.201 7272.221 7272.221VR 7272.120 7272.121 7272.121VR CARE INSTRUCTIONS: DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH. DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE. RUBBER WASHER (NOT USED ON VR FITTINGS) RUBBER WASHER (NOT USED ON VR FITTINGS) VANDAL RESISTANT PIN ON VANDAL RESISTANT FITTINGS ONLY OFFSET HOLE FOR VANDAL RESISTANT PIN VANDAL RESISTANT PIN ON VANDAL RESISTANT FITTINGS ONLY OFFSET HOLE FOR VANDAL RESISTANT PIN PUTTY IMPORTANT: FLUSH ALL SUPPLY LINES PRIOR TO FITTING INSTALLATION. LOCK NUT STEEL WASHER M...
Este manual também é adequado para os modelos :Outros acessórios para a casa - 7272.121 (561.49 kb)
Outros acessórios para a casa - 7272.201 (561.49 kb)
Outros acessórios para a casa - 7272.221 (561.49 kb)
Outros acessórios para a casa - 7272.221VR (561.49 kb)