Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
Do not empty the water. Remove the Grow Surface from the Bowl and place on a counter covered by a towel (your roots will be dripping with water). Hint: Lift the View Door and slide one hand into the Bowl to lift. Don’t worry if you gently tear some roots. Gently remove each plant from its Grow Surface Opening and place the plants upright in the Bowl so that the roots are in the water. Hint: Note where the plants were positioned on the Grow Surface. Turn the Grow Surface upside down on the towel, with the back of the Pump Tower facing you. (see top right photo) Take out Pump Filter, rinse it (no soap) and set it aside. BP Bowl View Door Remove the Pump Connector Screw in the Pump Connector using a Phillips-head screwdriver. Pull up on Pump Connector to disconnect it from the bottom of the Grow Surface. Remove Pump Cover Plate -insert flat-head screwdriver into each of the 3 rectangular slots and turn screwdriver 90° to help pry out the cover plate. It is okay to use force. Pump Connector Screw Pump Connector 0 Remove the Pump by inserting the flat-head screwdriver into the space under the pump. Push down on the handle of the screwdriver to lift the Pump out of the Pump Tower. Pull wire out of Wire Slot. Discard old Pump in trash. Remove part A with needle-nose pliers and discard in trash. Directions continued on back Installing New Pump Adjust Pump Dial to the 2 o’clock position (2 clicks). Insert the new Pump into the Pump Tower making sure that: a. The rubber feet of the Pump are facing up. b. The Pump Connector Wire goes behind and underneath the Pump. c. Pump Cover Plate is snapped back onto top of Pump. 55 Plug the Pump Connector into the Grow Surface so that the Metal Contacts face up and out and the Connector Wire is inside the Wire Slot. ^6 6 Replace and screw in the Connector Screw so it is hand-tight (no power tools, please!) Place Pump Filter back into slot. l19j Place Grow Surface upright on towel and gently replace plants back into their original positions on the Grow Surface. Place Grow Surface back into bowl and replace bowl on the Base. Press down firmly on the Grow Surface. Congratulations... You have replaced your AeroGarden Pump! If you have any questions please feel free to contact Customer Service: ^ I, 1-800-GROW-NOW (1-800-476-9669) or email: info@aerogrow.com ©2006 AeroGrow International, Inc ' ' 3 300177AA...