Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
(See fig.1) Press the switch to turn on and release to turn off. (See fig.2) Duration The Faraday Star provides up to 2 minutes of continuous use when charged for 30 seconds. If it is completely drained of energy or used for the first time the Faraday Star should be turned off and shaken vigorously to fully charge the capacitor. Cautions 1. There is a strong magnetic field surrounding the Faraday Star. DO NOT place the Faraday Star within 30cm of cassette tapes, computer floppy disc, video tapes, credit cards, pacemakers, televisions, monitors or any other magnetic storage device or device affected by a magnetic field. 2. Do not attempt to remove the LED or any internal part. Care and maintenance • Clean with damp cloth • Clean the lens with standard glass cleaning products • Do not use petroleum based liquids such as gasoline or kerosene or solvents such as acetone to clean any part of the flashlight ACDelco ACDelco is a trademark of General Motors Corporation used under license to Daka Development Ltd. Model no. : LG08 Contents Outer Housing x 1 Inner Housing x 1 0 Switch Cover x 1 Magnet x 1 Rubber Bumper x 2 LED Bulb x 1 Inner Housing End Cap x 1 End Cap x 1 Lens x 1 Screw x 4 Switch x 1 Assembly PCB x 1 1. Insert Rubber Bumper in Inner _ Housing End Cap and pull to snap in /V-— Plac" p p p 2. Cut off excess rubber from Rubber Bumper. 3. Insert second Rubber Bumper into Inner Housing and pull using L pliers to snap in place. 4. Cut off excess rubber. 7* 5. Screw PCB onto Inner Housing t|f c making sure wires are connected as r * 6. Insert L.E.D. and into Inner Housing and make '''x. sure L.E.D. is pushed fully A) into place. if t Make sure the flat side of /' v\ if the L.E.D. lines up with the i \ flat side of the L.E.D. socket. 1 J ^-vO 7. Insert Magnet into Inner Housing and push Inner Housing End Cap into [ place. 8. Locate switch in hole in Flashlight Body. V. 9. Keeping Outer Housing in C same position as in step 8 carefully insert Inner Housing >v and rotate until it fits fully f/1 inside. 10. Place Lens in place with C domed side facing up and screw shut with End Cap. ^^'Ss'\...