Physically check that the chisel is secure before operating. The chisel will have approximately 1-3/4” of play, but should not come out when pulled. Operating Instructions Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Work Piece and Work Area Set Up Designate a work area that is clean and 1. well-lit. The work area must not allow access by children or pets to prevent distract

PRODUCT FEATURES Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagrams on page 17. CAUTION! Always make sure the Power Switch (66) of the Demolition Hammer is in its “OFF” position and the tool is unplugged from its electrical outlet prior to adding accessories or performing maintenance on the tool. OIL CAP(45) SLIDER(4) FRONT CAP(1) KNOB(105) AUXILIARY HANDLE(104A) POWER SWITCH(66) VARIABLESPEED CONTROL(72) FIGURE E 1. Oil Cap (45): P

All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 Specifications Specifications Power Source Light Bulb Lens Charging Adapters Weight Features Description Battery, sealed lead-acid, 12 VDC, 7 AH Xenon, 12 V, 35 W High Intensity Discharge (HID); 3000 hour life 9 inch (dia.) with reflector Power co

Provide barriers or shields as needed. ELECTRICAL SAFETY 4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity

REV 10e Personal safety3. Stay alert, watch what you are a. doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Use safety equipment. Always wear b. eye protection. Safety equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection used for appropriate conditions will reduce p