• Ensure the exhalation vent holes are clear. Check Valve Function WARNING DO NOT use the mask if the valve flap is damaged or missing. NOTE: If the valve flap is damaged, distorted, or torn, it should be replaced with a new part. NOTE: For this procedure, refer to SECTION C in supplemental sheet provided. 1. Connect a standard 22mm bore, 6-foot tube from your flow generator to the hose swivel by pressing the tube end over the swivel. 2. Turn On the flow generator. Part No 1130237 5 Invacare®Tw

6. Connect the suction tubing to the labeled patient connector (outlet) on the collection bottle. Part No 636959 3 Aspirator Suction Unit Elbow Connector DETAIL “A” Tubing Power Cord Vacuum Adjustment Knob Vacuum Gauge Collection Bottle Holder Hydrophobic Filter Connection Tubing Lid Power Connection Fuse On (I) Position Off (O) Position FIGURE 1 Medical Suction Unit Using the Suction Unit CAUTION Should fluid be aspirated back into the unit, send your suction unit to an authorized service cente

USER: BEFORE using this patient lift, read this manual and save for future reference. For more information regarding Invacare products, parts, and services, please visit Portable Patient Lift and Sling WARNING A QUALIFIED TECHNICIAN MUST PERFORM THE INITIAL SET UP OF THIS LIFT. ALSO, A QUALIFIED TECHNICIAN MUST PERFORM ALL PROCEDURES IN THE SERVICE MANUAL. DEALERS AND QUALIFIED TECHNICIANS: DO NOT SERVICE OR OPERATE THIS EQUIPMENT WITHOUT FIRST READING AND UNDERSTANDING THE OWNER’S OPERATOR AND

3. With the patient on their side, push the fabrics of the seat and back gently under them. NOTE: The upper edge of the back section should be positioned slightly above the armpit level and the lower edge of the seat section positioned a few inches above the back of the patient’s knees (Detail “A” of FIGURE 5.1). 4. Roll the patient on to his/her back (Detail “D” of FIGURE 5.1). NOTE: assistants will reverse roles. 5. After the patient has been positioned once again on his/her back, you now need

Provide dealer’s name, address, model number, date of purchase, indicate nature of the defect and, if the product is serialized, indicate the serial number. Invacare Corporation will use a return authorization. The defective unit or parts must be returned for warranty inspection using the serial number, when applicable, as identification within thirty days of return authorization date. DO NOT return products to our factory without our prior consent. C.O.D. shipments will be refused; please prepa

• DO NOT store the device in extreme hot or cold temperatures, high humidity or under direct sunlight. • DO NOT wrap cord around device when storing. • Store nebulizer in a safe, dry location where it will not be crushed, banged, or subjected to damage. • Store cord in a safe location where it will not be cut or damaged. Storage 1. Be sure the nebulizer is turned OFF and cord is removed from outlet before storing. 2. Store the repackaged device in a safe, dry area. DO NOT place other objects on