Finish piping to be plumb and true. 2. Polysulfone and other exotic plastics cannot tolerate P.V.C. glue and pipe dope. Even the fumes can cause crazing. 3. Use teflon tape for threaded joints. 4. Make up assembly and fit pipes, then: remove F.M. after glue fumes are vented out. 5. Meter cannot support attached pipes. 6. Excessive vibration may cause float to give poor reading or cause possible fracture. 7. Wall, floor, and ceiling mounts to be carefully aligned and sturdy. A support should be a

The unique Communications Adapter provides a fully isolated serial interface and power source, allowing the transmitter to be configured with a “PC-Only” - no external power supply, calibrator or meter is required! QuicQuicQuicQuicQuick Stark Stark Stark Stark StartttttBefore beginning the process of setting up the transmitter, it is important to understand the difference between calibration and configuration. The transmitter’s precision references (4 and 20 milliamps out; resistance, voltage an

These values can be requested from the manufacturer when the sensor is purchased or may be measured by a testing lab. ..... SquarSquarSquarSquarSquar... e Re Re Re Re R... ootootootootoot Select this function if the transmitter’s output is to vary with the square root of the input. ........ Custom PCustom PCustom PCustom PCustom P.. ololololol....... ynomialynomialynomialynomialynomial The transmitter can use up to a 10th order polynomial equation (y = A + Ax + Ax2 + … + Ax10) as the transfer fu