KG Rudolfstraße 10 D-41068 Mönchengladbach Deutschland Tel: +49 (0) 2161-3521-0 (Reception), +49 (0) 180 22 22 668 (Service-Telefon; 0.06 €/Anruf), +49 (0) 180 22 66 888 (Wartungstelefon; 0.06 €/Anruf) Fax: +49 (0) 2161-3521 -1499 Email: reception@resmed.de ResMed Japan Nihonbashi Hisamatsu Bldg. 4F, 2-28-1 Nihonbashi-Hamacho, Chuo-Ku, Tokyo 103-0007, Japan Tel: +81 (3) 3662 5056 Fax: +81 (3) 3662 5040 ResMed Malaysia Sdn Bhd Suite E-10-20, Plaza Mon’t Kiara No. 2 Jalan 1/70C Mon’t Kiara 5048

Data Card. The following message is NOT displayed on the LCD after you try to update the settings using the Data Card: Settings Success Remove Card The settings were not Contact your clinician immediately. updated. Technical Specifications . Operating pressure 4 to 20 cm H2O range Dimensions 4.6” x 6.5” x 5.7” (H x W x D) (112 mm x 164 mm x 145 mm) Weight 2.9lb (1.3 kg) Power Supply • Input range for S8 Escape II with HumidAire 3i:100–240V, 50/60Hz; 110V, 400Hz; 2.5A < 140VA (110W) (maximum powe

• Discontinue using the Mirage Liberty if you have ANY adverse reaction to the mask system, and consult your physician or sleep therapist. • Discontinue using the Mirage Liberty if you experience nasal irritation, and consult your physician or sleep therapist. • Refer to your flow generator manual for details on settings and operational information. Using the Mask Select ‘Mir Full’ or ‘Full Face’ as the mask option when using the Mirage Liberty with ResMed flow generators that have mask setting

The device used for testing was Branson™ LTH 1828-24 hot water bath. 3 English Clinical Use Only Option 3: STERRAD Sterilization System Note: The Ultra Mirage™ II Nasal Mask is not validated for the STERRAD Sterilization System. Pre-sterilization 1 Disassemble the mask. 2 Clean the individual parts of the mask with a soft bristle brush for one minute while soaking them in detergent (eg, Alconox). Pay particular attention to all crevices and cavities. 3 Rinse the components twice by agit

VPAP S uses ResMed’s patented Easy-Breathe motor to make breathing easier for patients with obstructive sleep apnea (OSA), noncompliant CPAP users and those who require additional ventilatory support. Big performance in a small package The system is exceptionally compact and convenient, making it ideal for travel or home use. Featuring the Easy-Breathe motor, ResMed’s new technology, VPAP S offers nearly silent therapy, so patients and their bed partners can sleep peacefully throughout the night

Synchronized. ResMed’s VPAP technologies provide the optimum in bilevel therapy in a smaller, quieter package. The virtually noiseless motor is up to 90% quieter than competitive products, minimizing ambient sound and helping to provide an ideal sleep environment. Complete synchronization to the patient’s breath rate, including a backup rate in the ST, assures that every breathing need is monitored and successfully accommodated. The units are contained within a compact package— the smallest, mos

It is intended to be used for the short-term (maximum seven days) treatment of a single patient only, then discarded. MEDICAL INFORMATION Note: The mask system does not contain latex materials. If the patient has ANY reaction to any part of the mask system, discontinue use. CONTRAINDICATION • This mask may not be suitable for patients at risk of reflux of gastric contents. • Supervision is recommended if the patient has a reduced level of consciousness or is unable to remove the mask. WARNINGS •

Pay particular attention to all crevices and cavities. 3 Rinse the components twice by agitating them vigorously in drinking quality water and allow them to air dry out of direct sunlight. ResMed has tested the detergents Neodisher Medizyme (concentration at 2% for 30 minutes) and Alconox (diluted at 1%). Disinfection Using a certified hot water disinfection system, soak the disinfectable mask components using one of the temperature-time combinations listed in the following sections. Europe

frame . If you need to refit th . forehead pads (c), slid . them securely into th . tabs. Refer Figure 3 . 6 Fixez le tuyau . la piece pivotante . generateur d.air. . vous et procedez . ajustements . Pour demonter le masque . de le nettoyer, detachez l . coussin nasal, le harnais et l . tuyau d.air principal. Lave . les composants a l.eau tied . avec un detergent doux . Rincez abondamment e . laissez secher . Note . . Lavez le harnais a la mai . separement la premiere foi . car il risque de dete