Assessments - 5, GPA: 4.2
(
)
)
|
Fotos e especificações Sony VPL-VW200 |
por este dispositivo também tem outras instruções :
Facilidade de uso
Zone: Selects the desired range and makes adjustments. Adjust Color: Assigns the desired color to adjust the gaps in color. Select “R” (Red) or “B” (Blue) to make adjustments based on “G” (Green). Pattern Color: Select “R/G” (Red and Green) or “R/G/B” (White, all colors) when the “Adjust Color” is “R” (Red). Select “B/G” (Blue and Green) or “R/G/B” (White, all colors) when the “Adjust Color” is “B” (Blue). Adjust: The shift adjustment and zone adjustment of the color selected in “Adjust Color” can be made with < / ,, M / m buttons. When “Shift” is selected: Assign the settings of the horizontal direction (H) with < / , buttons and the vertical direction (V) with M / m buttons on the shift adjustment screen. When “Zone” is selected: Select the position to adjust with < / , buttons for the horizontal position (H position) and M / m buttons for the vertical position (V position), then press . Using the Menus 53 Network Setting Set the amount to adjust with < / , buttons for the horizontal direction (H direction) and with M / m buttons for the vertical direction (V direction). You can select the position to adjust again by pressing . Reset: Returns to the factory settings. Note Depending on the adjustments made above, colors may become uneven or the resolution may change. You can set internet protocols such as IP address, Subnet Mask, Default Gateway, and DNS Server when accessing the projector from a computer or using “ImageDirector3”application supplied. IP Address Setup Selects either “Auto (DHCP)” or “Manual.” When you select “Manual,” set the following “IP Address,” “Subnet Mask,” and “Default Gateway.” After completing all of settings, select “Apply” using m button, then press . IP Address Sets the IP Address of the projector. (1.0.0.0 to 223.255.255.255) Subnet Mask Sets the Subnet Mask of the projector. (1.0.0.0 to 255.255.255.255) Default Gateway Sets the Default Gateway of the projector. (1.0.0.0 to 223.255.255.255) Primary DNS Sets the DNS server to be used as a priority. (1.0.0.0 to 223.255.255.255) Secondary DNS Sets the alternative DNS server. (1.0.0.0 to 223.255.255.255) MAC Address Displays MAC address of the projector. You cannot change. Information Menu The Information menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp. Model name: VPL-VW200 Serial No. Memory No. Signal type Model Name Displays the model name (VPL-VW200). Serial No. Displays the serial number. fH (horizontal frequency) Displays the horizontal frequency of the input signal. fV (vertical frequency) Displays the vertical frequency of the input signal. Memory No. Displays the preset memory number of the input signal. Signal type Displays the type of the input signal. Lamp Timer Indicates how long the lamp has been turned on (total usage). Notes • fH (horizontal frequency) and fV (vertical frequency) may not be displayed depending on the equipment connected to the projector. • You cannot change the displays listed above. About the Preset Memory No. This projector has 38 types of preset data for input signals (the preset memory). When the preset signal is input, the projector automatically detects the signal type and recalls the data for the signal from the preset memory to adjust it to an optimum picture. The memory number and signal type of that signal are displayed in the Information menu. You can also adjust the preset data through the Screen menu. This projector also contains 20 different user memories beside the preset memories used for inputting analog computer signals. You can save input signals that have not been preset on these user memories. When an unpreset signal is input for the first time, a memory number is displayed as 0. When you adjust the data of the signal in the Screen menu, it will be registered to the projector. If more than 20 user memories are registered, the newest memory always overwrites the oldest one. See the chart on page 73 to find if the signal is registered to the preset memory. Using the Menus Note When the aspect ratio of input signal does not match the screen size, a part of the screen is displayed in black. 55 Operating the Projector from a Computer Accessing the Projector from a Computer You can check the present status of the projector on a computer display and control the projector from a computer. Confirm that the projector and computer are connected to the router/hub with the LAN cables, then turn on the projector, computer and router/hub. 1 Start Internet Explorer 5.0 (or later version) on your computer. 2 Type “(the IP address of the projector)” as the “Address,” then press the ENTER key on a keyboard. You can check the IP address of the projector using the Installation menu. (1 page 54) Enter the IP address here. Tip When “Standby Mode” in Setup setting is set to “Standard1”, you can access the projector from a computer even if the projector is in standby mode. Check...