Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Software - HP Virtual Connect Enterprise Manager BLc3000 24x7 Support No Media 1-encl Lic (940.96 kb)
Facilidade de uso
Using Expanded VLAN capacity with the Complete VC Domain Maintenance operation
Before applying Expanded VLAN capacity to a VC Domain 3.3x during Maintenance Mode, make
sure the VC Domain Group that the VC Domain belongs to is running firmware mode 3.3x or later.
. If you change a VC Domain 3.3x to Expanded VLAN Capacity and the Virtual Connect Domain
Group firmware mode is lower than 3.3x, the Complete VC Domain Maintenance mode operation
fails, because VCEM detects that Expanded VLAN capacity is not supported by other VC domains
with older firmware. The VC Domain displays the Under maintenance icon and VCEM is unable
to complete or cancel the maintenance operation.
To resolve this:
1.
Remove the VC Domain from the VC Domain Group.
2.
Delete the VC Domain configuration.
3.
Add the VC Domain to the VC Domain Group again.
Using Expanded VLAN capacity with the Cancel VC Domain Maintenance operation
Cancelling maintenance mode in VCEM will not revert the Expanded VLAN capacity configuration
back to Legacy capacity mode.
If you enable Maintenance Mode, change Legacy capacity to Expanded VLAN capacity, and then
click Cancel VC Domain Maintenance, VCEM cannot revert back to Legacy capacity mode in the
VC Domain. Instead, the VC Domain displays the Under maintenance icon and VCEM fails to
complete or cancel the maintenance operation. To resolve this, see the procedure to delete the
domain in “Using Expanded VLAN capacity with the Complete VC Domain Maintenance operation”.
Duplicate MAC and WWN address assignments
Use of Virtual Connect Enterprise Manager (VCEM) 6.2 or 6.2.1 may result in duplicate MAC and
WWN address assignments. This will occur if a Virtual Connect profile edit fails when removing
iSCSI or FCoE connections via the VCEM Graphical User Interface (GUI). The VCEM 6.2.2 or later
upgrade contains a critical fix and is strongly recommended to prevent this issue.
For more information, see the Support Communication - Customer Advisory, Document ID:
c02805558, available at http://h20000.www2.hp.com/bizsupport/TechSupport/
Document.jspobjectID=c02805558&lang=en&cc=us&taskId=101&prodSeriesId=4194735&
prodTypeId=3709945.
Known Issue
Assigning a profile to a server with two FlexNIC ports on the same physical NIC
VCEM does not report an error or warning message when assigning a profile to a server with two
FlexNIC ports on the same physical NIC. To avoid this situation, see the server profile details in
the VCM GUI to verify the results of the changes you have made and ensure that you do not have
a misconfiguration.
Changes to the HP Virtual Connect Enterprise Manager online help
There have been changes to the “Creating a server profile” and “Configuring multiple networks”
sections of the Online help. For the latest information on those sections, see the HP Virtual Connect
Enterprise Manager 6.3.1 User Guide.
For more information
For more information about VCEM:
•
HP Insight Software Quick Installation Guide
•
HP Insight Software Support Matrix
•
HP Virtual Connect Enterprise Manager 6.3.1 User Guide
6
... Este manual também é adequado para os modelos :
Software - HP Virtual Connect Enterprise Manager including 1yr 24x7 Support Flexible Qty c7000 Enclosure Lic (169.84 kb)
Software - HP Virtual Connect Enterprise Manager including 1yr 24x7 Support Single c7000 Enclosure Lic (169.84 kb)