Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Software - HP LeftHand P4000 Virt SAN Appliance SW 2-pk for VMware ESX Server SmartBuy Stck (77.35 kb)
Software - HP LeftHand P4000 Virt SAN Appliance SW 2-pk for VMware ESX Server SmartBuy Stck (276.39 kb)
Software - HP LeftHand P4000 Virt SAN Appliance SW 2-pk for VMware ESX Server SmartBuy Stck (763.44 kb)
Facilidade de uso
HP StorageWorks
Overview of Upgrading HP
P4000 G2 Series Upgrade to
StorageWorks P4000 G2s
10 GbE Hardware installation
This document describes how to upgrade the HP StorageWorks P4000
G2 to 10 Gigabit Ethernet (GbE) .
instructions
NOTE:
Upgrade instructions will vary depending on if the HP
StorageWorks P4000 G2 is already in a management group,
the system is new, and/or the system is not in a management
group.
Table 1 General upgrade steps for P4000 G2s
Download the software patch
Download software patch 10063. This procedure is the same regard-
less of the state or location of the P4000 G2.
1.
Go to http://www.hp.com/support/downloads.
2.
Navigate to the storage category and select Disk Storage Systems.
3.
Select the LeftHand P4000 Storage Systems category to find the
appropriate downloads for your storage node.
4.
Continue the upgrade process using the following instructions as
appropriate for your setup.
P4000 G2 is new or not
P4000 G2 is in a management group
in a management group
© Copyright 2010 Hewlett-Packard Development Company, L.P.
Download the 1-Gigabit to 10-Gigabit
Install hardware using the
Ethernet Migration Instructions.
First edition: February 2010
Hardware Upgrade to 10
Follow instructions in this guide for
GbE
The information in this document is subject to change without notice.
planning the upgrade.
Printed in Puerto Rico
Shut down the management group using
the instructions in 1-Gigabit to 10-Gigabit
www.hp.com
Ethernet Migration Instructions. Shutting
Open the CMC and install
down the management group places it
software patch 10063
in maintenance mode for the upgrade
onto the P4000 G2.
process, and also powers off the storage
nodes, so that you can remove them from
the rack.
Install hardware using the Hardware
Upgrade to 10 GbE
Following instructions in the 1-Gigabit to
10-Gigabit Ethernet Migration Instructions
• Open the CMC and install software
patch 10063 on the P4000 G2
• Configure network bonding on the
10GbE ports
Related documentation
AX705 96001
You can find more information about the HP LeftHand products from the
Manuals page of the HP Business Support Center website:
Page 1
... Este manual também é adequado para os modelos :
Software - HP LeftHand P4000 Virtual SAN Appliance Software for VMware ESX Server LTU (527.52 kb)
Software - HP LeftHand P4000 Virtual SAN Appliance Software for VMware ESX Server Stock LTU (527.52 kb)