Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação HP, Modelo HP Matrix Operating Environment w/Insight Control 24x7 Supp E-LTU

Fabricante : HP
Arquivo Tamanho: 798.73 kb
Arquivo Nome :
Língua de Ensino: enes
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


# Otherwise, total log file size is
# logFileSize * logNFiles
#
com.hp.gwlm.util.Log.logFileSize = 20
com.hp.gwlm.util.Log.logNFiles = 3
#
# Set the number of seconds for the high availability (HA) minimum
# timeout. Communication is considered lost on a managed node
# once the timeout period has elapsed.
#
# By default, communication is not considered lost until 10 allocation
# intervals have elapsed without communication. The default value of the
# property (60) is used only when the allocation interval is less than 6
# seconds.
#
com.hp.gwlm.node.HA.minimumTimeout = 60
#
# Enable/disable use of Instant Capacity (iCAP) to simulate movement of
# cores across nPartitions. To use iCAP, you must enable this property on
# each managed nPartition where you want to take advantage of iCAP. Also,
# each nPartition must meet the requirements outlined in the online help
# topic "Getting the most out of gWLM" as well as in the section "USING
# nPars AS COMPARTMENTS IN AN SRD" in the gwlmxml(4) man page on HP-UX or
# the gwlmxml(5) man page on Linux.
#
com.hp.gwlm.platform.icap.manageWithIcap = on
#
# Set the minimum number of Temporary Instant Capacity (TiCAP) minutes
# that must be available for TiCAP activation. gWLM will stop using
# TiCAP when the available balance goes below this threshold. The
# same value should be set on all agents managing the SRD. To use
# TiCAP, it must be available on the complex and enabled at the policy
# level or the SRD level.
#
com.hp.gwlm.node.ticap.minimumBalance = 30
Puertos de comunicaciones
gWLM utiliza los siguientes puertos para las comunicaciones:
Nodos gestionados: 9617
CMS: 9618
Si necesita cambiar estos puertos, agregue las líneas siguientes:
com.hp.gwlm.cms.port =portX
com.hp.gwlm.node.port =portY
a ambos archivos de propiedades:

gwlmcms.properties
En HP-UX, este archivo se encuentra en /etc/opt/gwlm/conf/. En Windows, se encuentra
en C:\Archivos de programa\HP\Virtual Server Environment\conf\. La ruta
de Windows proporcionada es la ruta predeterminada; sin embargo, puede haberse
seleccionado una ruta diferente en la instalación.

/etc/opt/gwlm/conf/gwlmagent.properties
Los valores portX y portY no pueden ser iguales.
La propiedad com.hp.gwlm.cms.port debe tener el mismo valor portX en todos los archivos de
propiedades, en todos los nodos gestionados y en el CMS. La propiedad com.hp.gwlm.node.port
Establecimiento de propiedades de gWLM
39


...

Este manual também é adequado para os modelos :
Software - HP Matrix Operating Environment w/Insight Control 24x7 Supp Flexible Lic (798.73 kb)
Software - HP Matrix Operating Environment w/Insight Control 24x7 Supp Tracking Lic (798.73 kb)
Software - HP Matrix Operating Environment w/Insight Control BL 24x7 Supp 1 Server Lic (798.73 kb)
Software - HP Matrix Operating Environment w/Insight Control BL 24x7 Supp Flexible Lic (798.73 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias