Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
1. Manually turn on the device you want to control. 3. Press and hold the device key you want to program (the ON•OFF key comes on). While you’re holding down the device key, use your other hand enter the first five-digit code for your brand in the code list (the ON•OFF key goes off after the first digit). 2. Find the Code List that came with the remote. Locate the section for the type of device you’re trying to program, and find your brand in that section. Circle the codes for your brand and keep them handy. Code L ist s Li sta de Cod igos 0 1 2 3 4 5 6 7 8 9 V VCR 0 1 2 3 4 5 6 7 8 9 D D S CBLE 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 NOTES Remember to enter the code for future reference in the box provided in the Code Retrieval section of this manual. If your brand isn’t listed in the code list, use one of the Code Search methods to program the remote control. (Refer to the Auto and Manual Code Search methods.) If you release the device key any time during the Direct Code Entry procedure, the ON•OFF key blinks four times, and the process is exited. The last programmed code under the device key is retained. Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code in the list. 4. When you’ve finished entering the five-digit code, keep holding down the device key and look at the ON•OFF key. Is the ON•OFF key on? YES: You’re done! You’ve programmed this device key. NO, it blinked four times and turned off: You have either entered a code number that is not in the code lists or missed a step in the code entry procedure. Try step 3 again. Manual Code Search The Manual Code Search lets you go one-by-one through all the codes for the device you’re trying to control. When you find the one that operates your device, you can stop the search and store that code. TIPS: The ON•OFF key serves as an indicator light during programming, giving you feedback at each stage of the process. Each device key is associated with a type of device—the TV is preset to search for TVs, SAT•CBL•DTC for satellite receivers, cable boxes or digital TV converters, DVD for DVD players, and VCR•AUX for VCRs or DVRs. To program a device key for a different type of device, see the Changing a Key’s Device Type section. The Manual Code Search method may take a long time because the remote searches through all of the codes in its memory one-by-one. If your brand is listed in the Brand Codes or the Code Lists, first try the Brand Code Search or the Direct Code Entry method. To exit without saving a new code at any point in the Manual Code Search, press the GO BACK key. TIP: Each device key is associated with a type of device—the TV is preset to search for TVs, SAT•CBL•DTC for satellite receivers, cable boxes or digital TV converters, DVD for DVD players, and VCR•AUX for VCRs and DVRs. To program a device key for a different type of device, see the Changing a Key’s Device Type section. The ON•OFF key serves as an indicator light during programming, giving you feedback at each stage of the process. In most cases, the keys on this remote perform the same functions as the keys on your original remotes once you’ve programmed this remote to operate your components. Many keys on this remote have other functions as well. Illuminated ON•OFF key serves as an indicator light to provide feedback. Device keys (TV, SAT•CBL•DTC, DVD, VCR•AUX) put the remote in the right mode to control your device. Backlight key ( ) turns backlighting on/off. GUIDE and MENU put the remote in menu/guide mode, which makes the CH/VOL keys serve as arrow keys; they also access the same features as the keys on your original remotes. CH and VOL keys have dual functions: they can act as navigation keys in menu systems as well as channel and volume controllers outside the menus. The CH keys also provide skip forward and skip back control for DVD players and DVRs that support this functionality. 1. Manually turn on the device you want to control. 3. Wait until the ON•OFF key comes on and stays on. Then release both keys. 4. Point the remote directly at the front panel of the device you want to control. Press ON•OFF on the remote and wait 2 seconds. The remote is testing a single code for your device. Did your device turn off? YES: Press the STOP key to store the code. You’re done! You’ve programmed this device key. NO: Press ON•OFF again. The remote tests the next code for your device. Keep pressing ON•OFF every 2 seconds until your device turns off. When it does, press STOP. TIP: Because there are so many codes, you may have to press the ON•OFF key many times—possibly hundreds of times. NOTES Throughout the programming of each key, keep the remote pointed at the IR sensor of the device you are programming the remote to control. Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work,...
Este manual também é adequado para os modelos :Controle remoto - RCR412SR (1.66 mb)
Controle remoto - RCR412SIR (1.66 mb)