Assessments - 4, GPA: 3.8 ( )

Fabricante : Thomas Arquivo Tamanho: 1.09 mb Arquivo Nome : Língua de Ensino:

Fotos e especificações  Thomas  Power Pack 1620

Ensure that only original spare parts and accessories are used. Do not expose the appliance to the elements, humidity or heating sources. After wet vacuuming, empty the collecting bin immediately. Unpacking the Unit Unpack the unit and inspect it for signs of shipping damage. Check that all items that should be included are present. Immediately notify your dealer or out customer-service department if you find any damage or if any items are missing. Save the original packing carton, since you can use it for storing the unit and might need it to return the unit to your dealer or a THOMAS Customer-Service Center for servicing. Disposing of the Unit Dispose of the appliance according to local regulations and pull out and cut off the mains cable beforehand. Assembly of castor wheels ® Undo the snap-on fasteners and lift the motor block. Push the castor wheels and the pegs into the base of the collecting bin until they snap into place. Dry vacuuming A After wet vacuuming, the appliance must be absolutely dry; dry off the flexible hose or tubes if necessary beforehand. Never dry vacuum without filters or with damaged filters. © Use long-term wet and dry filter (23) and lock with rotary clips. @ Only Model POWER PACK 1616: Assemble the foam rubber filter, tissue filter and clamping ring and fasten them with the turning clips. ® Press the filter sack on the suction connection firmly and lay it against the wall of the collecting bin. Place the motor block on top and secure it by means of snap-on fasteners. ® Connecting the flexible hose. Remove the hose by turning the hose connecting piece and withdrawing the hose. Assemble the accessories you require. Connect the mains cable. ® Turn the appliance on with the On/Off switch (5). Suction control (11, figure J) allows you to vary the suction power. - Sliding air trap closed = full suction power - Sliding air trap open = reduced suction power Model THOMAS POWER PACK30 SE Electric tools with a rating from 60 - 2000 W can be connected up to the appliance plugbox (6). This makes two modes of operation possible which can be selected by means of the selector switch (7) on the appliance. ^ Selector switch (7) Normal operation: Button with control lamp must not be pressed. Immediate start of all-purpose vacuum cleaner for all suction work by pressing the ON/OFF switch (5). Automatic operation: Select this mode of operation if an electric tool with dust extraction is to be connected. Connect the electric tool to the appliance plugbox and the suction hose to the electric tool. Press the button with control lamp in the selector switch (7) and switch on by means of the ON/OFF switch (5). -Q- 10 -e- PowerPack-Serie 2004-01 23.07.2004 11:17/ Seite 11 -Q- The control lamp indicates readiness for operation. The vacuum cleaner is automatically switched on at the same time by switching the electric tool on and off. When connected up to the mains cable (10) the appliance plugbox (6) is...

Baixe o seu

Para fazer o download, introduza 2 dígitos :