Assessments - 3, GPA: 3
(
)
)
|
Facilidade de uso
Remove the hose by turning the hose connecting piece and withdrawing the hose. Assemble the accessories you require. Connect the mains cable. ® Turn the appliance on with the On/Off switch (5). Suction control (11, figure J) allows you to vary the suction power. - Sliding air trap closed = full suction power - Sliding air trap open = reduced suction power Model THOMAS POWER PACK30 SE Electric tools with a rating from 60 - 2000 W can be connected up to the appliance plugbox (6). This makes two modes of operation possible which can be selected by means of the selector switch (7) on the appliance. ^ Selector switch (7) Normal operation: Button with control lamp must not be pressed. Immediate start of all-purpose vacuum cleaner for all suction work by pressing the ON/OFF switch (5). Automatic operation: Select this mode of operation if an electric tool with dust extraction is to be connected. Connect the electric tool to the appliance plugbox and the suction hose to the electric tool. Press the button with control lamp in the selector switch (7) and switch on by means of the ON/OFF switch (5). -Q- 10 -e- PowerPack-Serie 2004-01 23.07.2004 11:17/ Seite 11 -Q- The control lamp indicates readiness for operation. The vacuum cleaner is automatically switched on at the same time by switching the electric tool on and off. When connected up to the mains cable (10) the appliance plugbox (6) is under voltage; this applies also when both the ON/OFF switch (5) and the selector switch (7) are switched off. Wet vacuuming A Always remove the filter assembly (figure C,D+E) before commencing wet vacuuming, since otherwise the filter assembly will be ruined. Do not forget to unplug the line cord before removing the motor housing (2) from the tank. When vacuuming out containers in which the liquid level is higher than the top of the collecting bin and which have a larger volume than the capacity of the collecting bin, liquid can continue to be vacuumed beyond the capacity of the collecting bin if the float valve is closed. In such cases, vacuum only in partial amounts and intermittently empty the collecting bin. Lift the tube and flexible hose out of the liquid first and then turn off the appliance afterwards, in order to prevent an afterflow of liquid. A Keep the float valve (27, fig. K) clean and accessible at all times. It automatically interrupts vacuuming when the collecting bin is full. A 1% After completion of wet vacuuming, please clean and dry the appliance and the accessories used. If unexpected difficulties arise Water is coming out of the air expulsion openings of the appliance during vacuuming: - Is the float (figure K) blocked when vacuuming liquid and unable to operate? Sudden reduction in suction power - Has the float stopped the flow of air? This can happen if the appliance is standing at a slant or if the appliance falls over. Turn off the vacuum cleaner - the float will fall back into place - the appliance is read...
Este manual também é adequado para os modelos :Aspiradores - Power Pack 1616 (1.09 mb)
Aspiradores - Power Pack 1620 (1.09 mb)
Aspiradores - Power Pack 1620C (1.09 mb)
Aspiradores - Power Pack 1630 (1.09 mb)