Since the battery is discharged when the product is purchased, you must fully charge the battery before use. 3. Charging the Battery You should charge the battery completely before using the vacuum cleaning robot. Turning the Power Switch on or off To use the vacuum cleaning robot, you must turn the Power Switch on. If you turn the Power switch off, all settings will be reset. 1. Turn over the main unit and turn the Power Switch on. - If the icons are not turned on, it indicates that the

Install the batteries (type AAA) before use. Lift the battery compartment cover at the back of the remote control, while pressing the locking tab. Install the batteries into the remote control as shown by the figure below. (If the batteries are installed with the wrong polarity, the remote control will not work.' After inserting the tip of the cover into the slot, push the other end to close it until it clicks into place. * Specification: AAA type batteries 18_ assembling the cleaner 1. Ba

• Do not put any objects into openings. Do not use with any openings blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow. • Do not pick up toxic materials (chlorine bleach, ammonia, drain cleaner, etc.). • Do not pick up anything that is burning or smoke, such as cigarettes, matches, or hot ashes. • Do not use to pick up flammable or combustible liquids such as gasoline, nor use on areas where they may be present. • Do not use vacuum cleaning robot in an enclos