Patent Number 296,251 Operator’s Manual A Tacony Company x8444 3101 Wichita Court • Ft. Worth, TX 76140-1710 P201, P171, P131, 175 RPM P201HD, P171HD,175 RPM P202, P172, 175/320 RPM Standard Speed Standard Speed Heavy Duty Dual Speed P203, P173, 300 RPM P171SD, 175 RPM High Speed Sander Your new Powr-Flite® Floor Machine will afford you many years of trouble-free operating satisfaction provided it is given proper care. Prior to packaging, your Powr-Flite® Floor Machine was inspected by a Quality

1. Pressing down either the foot pedal or thumb switch once will turn ON the forward light, indicating suction only. Use this setting when vacuuming bare floors or using accessories. 2. Pressing down either the foot pedal or thumb switch a second time will turn ON both lights, indicating the brush roll is now rotating. Use this setting when vacuuming carpeted surfaces. 3. Pressing down either the foot pedal or thumb switch a third time will turn the vacuum OFF. Detaching the Upright Handle (see

BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG NO., TYPE NO., AND DATE CODE. IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER. SAVE THIS MANUAL FOR FUTURE REFERENCE. VEA EL ESPANOL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. Form No. 2442

Vacuum Indicator Lights for Bare or Carpet Floor Use (see Figure 7A and 7B) There are two indicator lights on the left side of the power head. 1. Pressing down either the foot pedal or thumb switch once will turn ON the forward light, indicating suction only. Use this setting when vacuuming bare floors or using accessories. 2. Pressing down either the foot pedal or thumb switch a second time will turn ON both lights, indicating the brush roll is now rotating. Use this setting when vacuuming carp

IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO THE SUCCESS OF BLACK & DECKER’S QUALITY IMPROVEMENT PROGRAM. (544-6986) Catalog No. FV5000 COVER SAVE THIS MANUAL FOR FUTURE REFERENCE. INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. VEA EL ESPANOL EN LA CONTRAPORTADA. IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including t

Hints for optimum use • When working in confined spaces, temporarily remove the accessory holder from the tube to improve your scope. • When vacuuming stairs, always start at the bottom and work your way up. Position the appliance on the floor and do the stairs until halfway. Then carry the appliance to a stable position which is at least one stair below your working position, and do the top half of the stairs. Carrying the appliance (fig. H) During use the appliance can be carried using the han

2. Rotate the sweeper down, keeping the upper hook engaged with the hanging recess, and position the locating recess over the lower boss of the charger bracket, as shown in Figure 4. 3. Plug the charger cord into any standard 120 volt, 60Hz outlet. The red LED should be glowing. Charging will begin immediately and continue at a slow trickle rate until you remove the sweeper from the bracket. 4. Keep on charge when not in use for maximum battery life. SWITCH The switch can be operated by moving t

It is not possible to “overcharge” the battery cells with the charger provided. THIS PRODUCT IS FOR DRY PICK-UP ONLY. OPERATION SWITCH (FIG. D) To start, slide the On/Off switch forward (i.e. “O”= Off, “I” = On). To stop, slide the switch back. Always return the product to the charging base immediately after use so that it will be ready and fully charged for the next use. Ensure that the product is fully engaged on the charging base. CLEANING THE PRODUCT (FIGS . E-I) WARNING: Never use the Dustb

• It may take several chargings before these times can be achieved. OTHER INFORMATION If the product does not work, check the following: . The power supply plug was correctly plugged in for recharge. ( It feels slightly warm to the touch.) • The power supply plug is not damaged and is correctly attached to the base. • The power supply plug is plugged into a working electrical outlet. ACCESSORIES Accessories are fitted into the nose of the product as shown in figure J. BATTERY REMOVAL AND DISPOSA

WARNING: Do not charge the battery at ambient temperatures below 39°F (4°C) or above 104°F (40°C). Use Switching on and off • Figure G - To start, slide the On/Off switch forward (i.e. “O”= Off, “I” = On) . • To stop, slide the switch back. • Return the product to the charger immediately after use so that it will be ready and fully charged for the next use. Ensure that the product is fully engaged with the charger plug. 5 90564314 6/15/10 7:53 AM Page 6 Cleaning and emptying WARNING: Projectile/