Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
SUPPLIED ACCESSORIES – 1 X AC 7.5V adapter TOP AND FRONT PANEL (See 1) 1 RADIO ON/OFF – switches the radio on/off; displays radio frequency – switches off sleep timer 2 BAND – select FM/ MW waveband 3 ALARM RESET / SLEEP – stops active alarm for 24 hours – activates the radio for sleep function – displays/adjusts/switches off sleep timer 4 REPEAT ALARM / BRIGHTNESS CONTROL – switches off the alarm for a 9 minute period – changes the brightness of the display illumination – stops SLEEP function 5 DISPLAY – shows clock/alarm times and status of the set 6 AL 1 (AL ) – switches on/off ALAM 1 radio mode – displays ALAM 1 time 7 AL 2 (AL ) – switches on/off ALAM 2 buzzer mode – displays ALAM 2 time 8 Battery compartment – for 4 batteries, type R6, UM3, AA 9 RESET – press if the set / display does not react to operation of any button BACK PANEL (See 2) 1 TUNING +/-– tunes to radio stations 2 VOLUME – adjusts the sound level 3 DC 7.5V – socket for AC/DC 7.5V adapter 4 Pigtail – improves FM reception LEFT & RIGHT PANEL (See 3) 1 Projection lens 2 REVERSE PROJECTION – turns time/hour digits upside down(AC-powered only) 3 PROJECTION ON/OFF – switches the projection on/off 4 ROTATE PROJECTION – adjusts projection slightly to a different angle 5 SET ALARM 1 / PRESET 1 – sets ALARM 1 time – stores, recalls and shows station 1 6 SET ALARM 2 / PRESET 2 – sets ALARM 2 time – stores, recalls and shows station 2 7 MINUTE + / PRESET 3 – adjusts the minutes for clock and alarm times – stores, recalls and shows station 3 8 SET TIME / PRESET 4 – sets the clock time – stores, recalls and shows station 4 9 HOUR + / PRESET 5 – adjusts the hours for the clock and alarm times – stores, recalls and shows station 5 POWER SUPPLY Batteries (not included) 1 Open battery door and insert four batteries (preferably PHILIPS POWER LIFE o alkaline), type R6, UM3 or AA as indicated in the compartment. 2 Remove the batteries from the set if they are exhausted or not be used for a long time. • When you replace batteries, the preset stations, alarm and clock time settings can be stored for up to 3 minutes. (see 'Self-Powered Back-Up'). Batteries contain chemical substances, so they should be disposed of properly. Mains adapter 1 Connect the mains adapter to the set's DC 7.5V socket and to the power socket. ™ indicates the set is now adapter operated. • Make sure your adapter is properly connected to save battery energy! 2 Always disconnect the mains adapter if you are not using the set. ™ indicator goes out. Helpful hints: To avoid damage to the set, use only the adapter supplied! The type plate is located on the bottom of the set inside the battery compartment. SELF-POWERED BACK-UP The self-powered back-up conveniently allows your preset stations, alarm and clock time settings to be stored for up to 3 minutes when there is a power interruption e.g. AC power failure or when changing batteries.The complete clock radio and backlight illumination will be switched off. If power supply returns after 3 minutes and the display shows: • clock time blinking - indicates you need to re-adjust the clock time. BATTERY LOW MODE indicates batteries low. Replace with fresh batteries to ensure all the features on your set will function properly. BASIC FEATURES Reset Should your set receive external interference e.g. static electricity from carpets, thunderstorms, etc. RESET allows you to clear all previous settings and start up again. • Use a ballpoint pen to press the RESET hole found on the bottom of the set. Illumination brightness Press REPEAT ALARM / BRIGHTNESS CONTROL once or more. • The brightness of the display can be adjusted: Bright . Medium . Low . Bright (when AC-powered) Low . Bright . Low . Bright (when battery-powered) Helpful hints: – When battery-powered, the display illumination is default low to help save energy. Any other use of the BRIGHTNESS CONTROL for a brighter display adjustment will therefore be effectively limited. SETTING THE CLOCK The time is displayed using the 24-hour clock. 1. Check the radio is switched off. 2. Press SET TIME to enter the clock setting mode. 3. Hold down or press HOUR + or MINUTE + repeatedly to set and adjust the hours and minutes respectively. Release HOUR + or MINUTE + when you have reached the correct setting. 4. Press SET TIME to confirm. RADIO 1 Press RADIO ON/OFF once to switch on the radio. ™ Display shows the radio frequency of the last selected waveband briefly before returning to the clock time. Your preset station is also shown if you are listening to a preset. (See 4) 2 Press BAND if you wish to change waveband. 3 Adjust the sound using VOLUME. 4 Press RADIO ON/OFF to switch off. Helpful hints: – In standby clock time, to view the current radio frequency, • Press RADIO ON/OFF once or more; • For preset stations, press the respective PRESET button (1-5) once or repeatedly. TUNING TO RADIO STATONS Automatic tuning • Press TUNING +/- one second or more to tune to your station. ™The radio automatically tune...
Este manual também é adequado para os modelos :Relógios - AJ3600/00 (138.38 kb)